Nội bộ cổ máy

Arthur Klink RISZ 25 x 2000 x 500

Manufacturer: Arthur Klink
Model: RISZ 25x 2500 x 500
Year of manufacture: 1980
Machine No.: 03.2123
General / technical data:
used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition
tractive force: 25000 KG
clearing length: 2000mm
wheel positions: 3 pieces
Distance between the wheels: 160mm
diameter of the drawing heads: 3 x Ø 100mm
Clearance width between the cylinders: Nominal size 500mm
passage width between the cylinders measured: max. 590mm
Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min
Return speed: hydraulically infinitely variable from 5 to max. 25m/min
Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit)
Power supply / connected load: 380Volt 50 HZ / 22 KW
Accessories / special equipment:
The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable).
The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor.

Gbodpfedffzfsx Aczeu
Remarks:
The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.