Máy cắt sợi tạo hạtAccrapack Systems LTD
Series 750 Pelletizer
Máy cắt sợi tạo hạt
Accrapack Systems LTD
Series 750 Pelletizer
FCA VB chưa bao gồm thuế GTGT
6.500 €
Năm sản xuất
2011
Tình trạng
Đã qua sử dụng
(chức năng bị giới hạn)
Vị trí
Bergen op Zoom 

Dữ liệu cơ bản
- Tên máy:
- Máy cắt sợi tạo hạt
- Nhà sản xuất:
- Accrapack Systems LTD
- Mô hình:
- Series 750 Pelletizer
- Năm sản xuất:
- 2011
- Tình trạng:
- sẵn sàng sử dụng (đã qua sử dụng)
- Tính năng hoạt động:
- chức năng bị giới hạn
Giá & Vị trí
FCA VB chưa bao gồm thuế GTGT
6.500 €
- Vị trí:
- Bergen op Zoom, Hà Lan

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23348531
- Cập nhật:
- lần cuối vào ngày 17.11.2026
Mô tả
The Accrapak Systems Ltd Series 750 is a compact, base-mounted dry-cutting strand granulation and downstream system for thermoplastic materials.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Iedpfs Akvlxex Afwjbd
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Key features and technical overview
• Design: Compact combination or stand-alone units consisting of a cooling bath, strand dryer (air knife/air miser), and granulator on a common base frame.
• Model
o 750-3 / other models: For 8–12 strands, throughputs up to approximately 200 kg/h, approximately 2.2 kW, 3–4 m cooling bath.
• Cutting principle: Multi-tooth inclined/helical rotor against a fixed counter blade for uniform cutting. Eccentric bearing housings enable precise readjustment.
• Drive options: Available as a single drive.
• Infeed and handling: Driven upper infeed roller with deep teeth (lubricant-free) and straight infeed tables (also ideal for softer materials).
• Safety & maintenance: The overhung design allows for quick removal of infeed rollers and rotor without disassembling the main bearings. Safety solenoid interlocks on the hood and discharge chute only release these when the machine is completely stopped.
Note: There is transport damage to the control panel housing.
Iedpfs Akvlxex Afwjbd
Operating hours are unknown, but due to its use in a pilot plant, they are likely lower than in a production environment.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Trực tuyến lần cuối: Hôm qua
Đã đăng ký từ: 2026
19 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+43 660 2... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
































