Máy nghiền – máy cắt rotorVon der Mehden GmbH
Rewowi 990NZ Quad
Máy nghiền – máy cắt rotor
Von der Mehden GmbH
Rewowi 990NZ Quad
FCA VB chưa bao gồm thuế GTGT
59.000 €
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Innsbruck-Land 

Dữ liệu cơ bản
- Tên máy:
- Máy nghiền – máy cắt rotor
- Nhà sản xuất:
- Von der Mehden GmbH
- Mô hình:
- Rewowi 990NZ Quad
- Tình trạng:
- sẵn sàng sử dụng (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 3.000 h
Giá & Vị trí
FCA VB chưa bao gồm thuế GTGT
59.000 €
- cho thuê:
- có thể
- Vị trí:
- Innsbruck-Land, Áo

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
4.500 kg
Chi tiết công suất
Điện áp đầu vào:
400 V
Loại dòng điện đầu vào:
ba pha
Thông tin chi tiết
Chiều dài rô to:
1.000 mm
Bề rộng rô-tơ:
990 mm
Chi tiết về đề nghị
- ID tin đăng:
- A23349086
- Cập nhật:
- lần cuối vào ngày 18.11.2026
Mô tả
The Quad 990 from Von der Mehden GmbH is a slow-speed, four-shaft shredder specifically designed for continuous industrial operation in data privacy-compliant document destruction.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
Isdpo Akv I Tjfx Ag Nsii
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
Isdpo Akv I Tjfx Ag Nsii
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2026
1 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49+43660... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi












