Xe tải lối đi rất hẹpSTILL
MX-X
Xe tải lối đi rất hẹp
STILL
MX-X
giá cố định chưa bao gồm thuế GTGT
35.000 €
Năm sản xuất
2020
Tình trạng
Đã qua sử dụng
Vị trí
Puchheim 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Xe tải lối đi rất hẹp
- Nhà sản xuất:
- STILL
- Mô hình:
- MX-X
- Số máy:
- 612334X00379
- Năm sản xuất:
- 2020
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 2.810 h
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
35.000 €
- Vị trí:
- Puchheim, Đức

Gọi điện
Chi tiết kỹ thuật
- Tải trọng:
- 750 kg
- Chiều cao nâng:
- 10.610 mm
- Loại nhiên liệu:
- điện
- Chiều cao xây dựng:
- 4.400 mm
- Dung lượng pin:
- 930 A
- Điện áp ắc quy:
- 80 V
- Chiều dài càng:
- 1.250 mm
- Trọng lượng tổng cộng:
- 8.330 kg
- Thiết bị:
- chiếu sáng
Chi tiết về đề nghị
- ID tin đăng:
- A19915070
- Cập nhật:
- lần cuối vào ngày 07.10.2025
Mô tả
Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad!
STILL Order Picker MX-X 80 – Used unit with premium features, single sale
Vehicle Data:
- Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork)
- Year of manufacture: 2020 | Operating hours: approx. 2,810 h
- Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm
- Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm
Lodpfxow U El Ts Ac Dohr
- Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA
- Adjustable forks: hydraulic, outer width 400 – 1,650 mm
Features (Selection):
- Mobile personal protection system with 2 laser scanners, fully factory-integrated
- Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm
- IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss
- Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield
- Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable
- Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation
- Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights)
- OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction
- Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing
Battery & Charger:
- 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL)
- External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display
Special features:
- Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications
- Machine is currently set up and ready for demonstration
- Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse
Condition & Removal:
- Very well maintained, fully functional, no known defects
- Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
STILL Order Picker MX-X 80 – Used unit with premium features, single sale
Vehicle Data:
- Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork)
- Year of manufacture: 2020 | Operating hours: approx. 2,810 h
- Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm
- Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm
Lodpfxow U El Ts Ac Dohr
- Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA
- Adjustable forks: hydraulic, outer width 400 – 1,650 mm
Features (Selection):
- Mobile personal protection system with 2 laser scanners, fully factory-integrated
- Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm
- IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss
- Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield
- Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable
- Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation
- Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights)
- OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction
- Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing
Battery & Charger:
- 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL)
- External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display
Special features:
- Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications
- Machine is currently set up and ready for demonstration
- Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse
Condition & Removal:
- Very well maintained, fully functional, no known defects
- Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2025
Gửi yêu cầu
Điện thoại & Fax
+49 89 20... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Wijchen
9.630 km
Máy chọn đơn hàng
StillMX-X
StillMX-X
Quảng cáo nhỏ
Freising
9.326 km
Bồn lên men và lưu trữ hình trụ nón (ZKG, 5 chiếc)
Johann Albrecht (JBT)
Johann Albrecht (JBT)
Quảng cáo nhỏ
Dinslaken
9.570 km
Bộ chọn đơn hàng cấp cao
StillMX-X TE
StillMX-X TE
Đấu giá
Đấu giá đã kết thúc
Gelderland
9.630 km
Máy chọn đơn hàng
StillMX-X
StillMX-X
Quảng cáo nhỏ
Kaunas
8.384 km
Đóng gói pallet cho mọi sản phẩm
SchubertTLM-F2 / F44
SchubertTLM-F2 / F44
Quảng cáo nhỏ
Baarle-Nassau
9.696 km
Thang máy lưu trữ
KardexLR35
KardexLR35
Quảng cáo nhỏ
Freising
9.326 km
Hệ thống CIP
SPX
SPX
Quảng cáo nhỏ
Lanaken
9.671 km
Kho con lăn tự động 10000T
SicmaIRS
SicmaIRS
Quảng cáo nhỏ
Đức
9.339 km
Máy đóng gói thùng carton
BuhmannC300/PF800
BuhmannC300/PF800
Quảng cáo nhỏ
Korschenbroich
9.599 km
Sideloader
LindeK 3-Seitenstapler
LindeK 3-Seitenstapler
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi






















































































































