Rơ moóc sàn thấp

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website.

Excerpt from the equipment list. Full equipment details available upon request.

2 pairs of wheel recesses:
* 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the neck bend, including a one-piece drivable aluminum cover, suitable for a maximum surface load of approx. 11,650 daN/piece
* 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including a one-piece drivable aluminum cover
* Suitable for transporting wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear overhang of wheel loader 2,220 mm
* Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of the longitudinal beams)
* Reinforced slewing ring for a total weight of 44 t

Frame attachments:
* 5 pairs of stake pockets on the outer frame for square tube stanchions approx. 100x50x5 mm (3 in the low bed and 2 on the raised platform)
* Low bed platform on both sides with extendable widening sections with approx. 50 mm softwood planks
* 4 pairs of foldable lashing rings, approx. 10 t each, positioned as follows: 1 pair at the front of the raised platform, inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the bend, inside the longitudinal beams, 1 pair at the rear of the low bed right before the drive-up slope, in the excavator bucket recess left and right

Drawbar:
Fixed drawbar with approx. 50 mm heavy-duty draw eye, cranked version, silent bushing mounts, drawbar holding spring with tensioner
Truck coupling height from approx. 775 mm to approx. 975 mm, drawbar length approx. 1,800 mm

Support equipment:
* 2 hydraulic rear supports – individually operable, control located in a dedicated stainless steel box

Axles:
* SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters

Wheels:
* 16 tires 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity approx. 12t / axle)
* 16 steel rims 6.75 x 17.5, with offset, painted black

Cgsdpfoyhkrxox Ah Isn
Brake system/Suspension:
* EBS system 4S3M, 1st and 3rd axle monitored
* RSS/RSP - stability program
* Air suspension with lifting and lowering function, front and rear can be operated separately

Assistance/Safety systems:
* SWIT - Schwarzmüller Intelligent Telematics

Floor:
Softwood flooring approx. 50 mm, impregnated, protruding approx. 5–10 mm above the top edge of the frame, steel checker plate cover above rear wheels

Ramps:
2 foldable 2-section steel loading ramps, hydraulically extendable, slope approx. 10 degrees, length approx. 2,750 + 1,350 mm, width approx. 800 mm, with hardwood surface approx. 50 mm impregnated
Ramps can be adjusted in width from a minimum interspace of approx. 250 mm up to a maximum total width of 3,000 mm.
Ramps can be locked in transport position by a hydraulic locking block, ramps remain in the uppermost position without additional securing, control located in a dedicated stainless steel box.
Hydraulic ramp lifting equipment operated via existing 2-line truck connection. Pressure-lock quick couplers BG3 (plug diameter approx. 20.5 mm) on the trailer/semitrailer. Pressure line on the right in direction of travel, return lin

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.