Quạt ly tâm

Reitz MSE 025-016030-00

Convey grain, pellets, biomass, or other dry bulk materials pneumatically using a heavy-duty industrial fan, when lightweight extraction fans are insufficient.

Dcedozx Ebzspfx Apdsl
This Reitz Umwelttechnik fan was used for pneumatic material conveying in our own facility and is fully functional. It has a flow rate of approximately 9,600-10,000 m³/h, direct drive, and a 700 kg welded steel construction mounted on a mobile, liftable base frame. Nameplate photos and technical documentation are available; inspections are welcome.

Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited; loading this 700 kg unit must be scheduled.

Best for: pneumatic conveying of dry bulk material, high-volume industrial ventilation, and process air where lightweight extraction fans are inadequate.

Not suitable for: wet or sticky materials, air above 80°C, or applications requiring formal ATEX certification unless independently verified.

What the specifications mean in practice:
• 160-167 m³/min (~9,600-10,000 m³/h) - provides sufficient airflow to convey material through piping, not just extract dust.
• 223-250 daPa total pressure increase - maintains material flow over distance and through bends.
• Direct-driven 24.5/28 kW motor - eliminates the need to tension, align, or replace belts.
• 700 kg welded steel housing, backward-curved impeller - designed for continuous industrial operation.
• Mobile, liftable base frame - can be moved into position using a forklift or crane.
• Max. 80°C, up to 3100 rpm - suitable for ambient and moderately warm process air.

What you get: the complete fan unit with backward-curved impeller, motorenmaier 24.5/28 kW three-phase motor (IP55, 400/690V), and welded base frame, ready for connection.

Note: the safety plate refers to explosion-protection instructions. If formal ATEX certification is relevant to your application, it should be independently verified.
Technical data (from nameplate):

Manufacturer: Reitz Umwelttechnik | Type: MSE 025-016030-00 | Serial/Year: 567856 / 2009
Volume flow: 160-167 m³/min (~9,600-10,000 m³/h) | Total pressure increase: 223-250 daPa | Shaft power: 8.7-11 kW
Speed: 2915-2925 rpm (max. 3100) | Max. temperature: 80°C

Drive motor: motorenmaier gmbh, Type 7AA160L-02V, 24.5/28kW, 2-pole, IP55, 400/690V | Weight: 700 kg
Condition: Used, functional, previously used for pneumatic material conveying.

Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement).

Buy with confidence: manufactured in 2009 (serial 567856) by a reputable German manufacturer, used in our own facility, fully functional, and can be tested before pickup. Nameplate photos and technical documentation are available; in-person inspections are possible in Kerns OW by appointment. You can verify the identity, condition, and operation before making a purchase.

Why buy now: this is a single, used machine, not stock – once sold, this specific configuration is no longer available; a 700 kg fan on a base frame is not an item we typically restock.

First-buyer bonus: free loading with our forklift at no extra cost. Valid until September 9, 2026, or until sold.

Action: please provide your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.