Hệ thống lắp ráp ép

MDS Autoriv Handarbeitsplatz A220-PD

MDS
Type: MDS A220-PD
MDS A220-PD Manual Assembly Station
The A220-PD assembly system is a stationary manual assembly station for processing press-fit components.
Intended use:
The machine is used for press-fitting connecting elements.
The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine.
The operator then starts the press-fitting process using a foot switch.
The press-fitting process runs automatically.
Connecting elements:
Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin
Thread size: M5, M6, M8, M10, M12
Technical data:
Control voltage: 230V/10A
Connection plug: HAN 10, not wired
Temperature ranges:
Transport: -20°C to +60°C
Operation: +10°C to +40°C
Storage: -20°C to +50°C
Hjdszgr I Rjpfx Ad Ssp
Compressed air connection:
Operating pressure: 6 bar
Quality: Treated, water-free, and oil-free air
Connection: 1/2" connection thread
Machine dimensions:
Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm
Values apply to a working height (AH) of 1000 mm.
Pneumatics:
Standard: Manufacturer SMC
Variant: Manufacturer FESTO
Control:
Standard: Manufacturer B & R
Variant: Manufacturer Siemens
Machine type: C-frame A220-PD
Continuous sound pressure level (LpA): 78 dB
Operating modes:
The operating modes can be changed in the control panel.
Automatic mode:
The press-fitting of the connecting elements takes place in automatic mode.
Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process.
Manual mode:
In manual mode, adjustments are made to the machine.
In this operating mode, movements can be activated individually.
Weight: Approx. 600 kg
Condition: used
Scope of supply: (See picture)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by phone.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.