Cần cẩu gắn trên xe tải

MAN MAN 8x4 mit F1150RA.2.28 L616 Winde

MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane

Vehicle description for: TGS 35.520 8x2H-6 BL CH

Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel

Commercial tonnage: 35 t
Main wheelbase: 2,980 mm
Wheelbase between front axles: 1,795 mm
Wheelbase between rear axle and trailing axle: 1,350 mm
Exhaust silencer, side-mounted, right
Downward exhaust outlet
2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands
390 l fuel tank capacity, left side
35 l AdBlue tank capacity, right side
1-cylinder air compressor, 360 cc, with economy system
Pneumatically regulated air processing
Compressed air tanks, steel
Electronic Braking System (EBS)
Anti-lock Braking System (ABS)
Full emergency brake assist
Disc brakes on front axle
Disc brakes on 2nd front axle
Disc brakes on rear axle
Disc brakes on trailing axle
Emergency brake signal, hazard light activation
LED side marker lights
MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e
Iedpfx Aewllmaeczjih
Heated fuel filter for fuel up to purity class 25
Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve)

F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge)

Endless slewing range
All hydraulic cylinders double-acting
Piston rods hard chrome-plated
Double linkage system with PROLINK (overbending articulated arm up to 12°)
Electronic overload switch-off with FX900
FASSI stability control FSC including LMB II
Emergency stop and visual alarm (90% and 100%)
Pressure relief and load-holding valves
XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift)
RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display
Danfoss D900 control block with 4 control valves mounted on crane column
Emergency operation for crane control
High-pressure filter supplied plumbed
Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base
Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m
Outriggers operable via radio control with proportional control block
IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control
Standard color RAL 3020 traffic red - all cylinders painted black
Load hooks and mounting shackles (short / 500mm)
Transport position: folded transversely to the direction of travel
Attention: Observe vehicle voltage / 12V or 24V, standard 24V

FASSI Stability Control FSC-S/II
IE742 connection box
Low-profile subframe
180° hydraulically tiltable outriggers / both sides
Control system for auxiliary function "winch / xhe-dynamic"
Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic

Prepared for operation with variable displacement pump (LS)
Work light operable via display (1 b/w function)
1 LED work light mounted on articulated arm
LED for 2 outriggers, not mounted (crane)
LED for 2 outriggers, not mounted (additional support beams)
GR.15 electrical rotary distributor with 15 slip rings
FUNK-V7-RCS
V7 RCS radio remote control
Fassi radio remote control V7S:
Available with 6 or 8 functions with linear levers or joysticks.
V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons
Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.