Bình chịu áp lực 5400 lít có thể gia nhiệt/làm lạnh, Aisi 316 với cánh khuấy chân vịt.

8467

Location: Bremen
Condition: used
Volume: 5,400 liters
Vacuum: 1.0 bar
Maximum overpressure: 6.0 bar

Tank

Maximum operating temperature (tank): 200°C
Design: suspended
Tank support: ring base

Heating/Cooling: available
Cylinder temperature control: half-pipe coil
Heating / cooling jacket

Bottom temperature control: half-pipe coil

Internal diameter: 1,800 mm
Cylindrical height: 1,690 mm
Total height: 3,700 mm
Technical data / dimensions

Bottom wall thickness: 8 mm
Cylinder wall thickness: 6 mm
Top wall thickness: 16 mm

Technical documentation: drawing, inspection certificate

Equipment

Manway / access port: on top (DN 500)
Ljdpfsxqa Dnsx Aczsah

Nameplate:
Equipment: crane lugs

Outlet: flange DN100
Note: slight residues

Remarks: Support ring made of carbon steel; half-pipe coil not shown in vessel drawing
Last application: chemical industry
Product-contact material: V4A 1.4571 (AISI316)
Material properties

Temperature control system material: V2A 1.4541 (AISI304)

Agitator

Agitator manufacturer: Ekato
Power: 3.6 kW
Speed: 450 rpm
Agitator type: propeller
Seal: mechanical seal with thermosiphon vessel

Voltage: 400/690 V

Explosion protection: motor is Ex-protected (compliance with applicable ATEX guidelines under local conditions must be verified)

Bottom bearing:
Agitator arrangement: eccentric on top
Agitator documentation: comprehensive documentation available

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.