Hệ thống phân phối in nhãn
4050S
Hệ thống phân phối in nhãn
4050S
VB chưa bao gồm thuế GTGT
6.650 €
Tình trạng
Đã qua sử dụng
Vị trí
Borken 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
VB chưa bao gồm thuế GTGT
6.650 €
- Vị trí:
- Dunkerstrasse 29, 46325 Borken/Burlo, DE
Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A7379912
- Số tham chiếu:
- 25075
- cập nhật:
- lần cuối vào ngày 11.04.2025
Mô tả
Bluhm Weber Legi-Air- 4050S Labeling Machine
Isdpjibh Tkjfx Aczotn
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
Isdpjibh Tkjfx Aczotn
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+49 2862 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi