Nhà máy băm nhỏ

mütek MRZ 530 ECO - 15 kW

Single-shaft shredder MRZ 530

Ksdpfxsd Db N Is Altjdr
Included:
+ Profile rotor for increased throughput

Options:
Double knife row + €895 net
Veneer and paper scraper + €970 net
* recommended for extremely thin materials with a thickness of less than 3 mm

Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials, such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation.

We would be happy to provide you with a free test using your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos.

Machine data:
Motor: 15 kW; 400 V - 50 Hz - 3 phase,
Knives: multiple rotation,
Rotor diameter: 260 mm,
Control: Siemens S7-1200 PLC,
Hopper (mm) 510 x 810 mm,
Hopper volume approx. 0.4 m³,
Throughput 1 - 5 hopper loads / h,
Hydraulically operated slide,
Screen size as required (10 - 40 mm),
Suction nozzle Ø 160 mm,
Weight approx. 1,000 kg,
Dimensions approx. 1550 x 1100 x 1640 mm,
Moisture content of the raw material: must be below 30% (oven-dry).

Standard included:
• Fast hydraulics
• Profile rotor
• Control cabinet with Siemens PLC control
• Automatic star/delta start
• Automatic OFF when the rotor is idle
• Removable suction chute
• Speed 70 - 100 rpm for higher throughput
• Cyclic control to avoid idle times
• Performance-enhancing step control of the hydraulic slide
• Stable guides for the hydraulic slide

Further shredder options:
- Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net

- Inclined conveyor belt + €8,770 net
Horizontal part: 1200 mm
Ascending part: 2500 mm
Angle: adjustable from 0-60 degrees
Discharge height: approx. 2000 mm
+ - 100 mm

- Overband magnet + €5,980 net
- Control of conveyor belt and overband magnet + €2,750 net
(Start and stop synchronized with the shredder)

Requirements for the input/raw material:
- The moisture content (oven-dry) must be below 30%
- Metals and mineral impurities such as sand, stones, etc. lead to increased wear.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.