Máy băm, máy nghiền gỗmütek
MGZ 1030 - 22 kW
Máy băm, máy nghiền gỗ
mütek
MGZ 1030 - 22 kW
năm sản xuất
2025
Tình trạng
Đã qua sử dụng
Vị trí
Neckartailfingen 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Máy băm, máy nghiền gỗ
- Nhà sản xuất:
- mütek
- Mô hình:
- MGZ 1030 - 22 kW
- Năm sản xuất:
- 2025
- Tình trạng:
- gần như mới (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 55 h
Giá & Vị trí
- Vị trí:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20648835
- Cập nhật:
- lần cuối vào ngày 01.12.2025
Mô tả
Machine with special rotor
Available immediately
Advantages:
Tedsx Af Rdopfx Aa Rsf
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Available immediately
Advantages:
Tedsx Af Rdopfx Aa Rsf
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2005
Gửi yêu cầu
Điện thoại & Fax
+49 711 5... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
quảng cáo nhỏ
Menslage
9.462 km
BÀN ĂN ALWID + Dụng cụ đẩy kính DEPALLETIZER mới (2017)
ALWIDNeuglasabschieber
ALWIDNeuglasabschieber
quảng cáo nhỏ
Hamburg
9.300 km
Người đóng gói bó
AMTECBDM 15 M
AMTECBDM 15 M
quảng cáo nhỏ
Đức
9.339 km
MÁY LÀM LẠNH
MeurerFILMline CMB 600
MeurerFILMline CMB 600
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi



















