Máy ép kiện với hệ thống khử bụi

mütek

Overview - of the different variants
*Not every position is required:

Optional:
-Bale shredder MHB from 24.990 € net

-MHZ straw mill from € 7,980 net
-Special hopper 970 € net

-Cyclone from € 3,750 net

-Sheet metal silo demonstrator with discharge (only sketched in the picture)
*optional, if you want to load with the wheel loader
Unit price net from € 14,750 - Demonstrator

-Dedusting auger - length approx. 4 m
4 sieves are mounted on the underside, which are extracted.
Unit price net from: 9.750 €

- Extraction parts / hoses flat rate 945 € net

- Complete control system
Net unit price: € 2,750

-Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning
Connection 160,
fan 2,2kw
air capacity 1850m³ /400 V
Automatic compressed air cleaning
Unit price net from: 6.950 €

-Baler B 400
Bales approx. 400x400x800 (height adjustable)
Fjdjff Sbispfx Abwopf
Up to 30 bales per hour with + - 20 kg
from 59.995 € net

*A reference system (baler) is located in zip code: 64579 Gernsheim

Technical data:
Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request)
Bale weight +/- 20 KG (depending on material)
Capacity: approx. 30 bales per hour
Storage container approx. 0.7m³ capacity
Filling level sensors for min./max. filling level in the container
Hydraulic pre-compressor
Hydraulic compression ram
Hydraulic unit, valve block with oil tank
Pump 18.5 KW / 50 liters
Rollers in the bale chamber for easy bale push-off
Dimensions (l x w x h) 3105x2830x2455 mm
Weight approx. 1500 KG

mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of
materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw.
straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation.
quality in continuous operation.
The baler compacts the material filled into the storage container without the addition of binding agents
and packs the material into plastic bags. The volume of the material can be
considerably with the baling press. The volume reduction rate depends on the material. The
maximum material moisture content must not exceed 18 % Atro.
The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³.
volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system
as a complete disposal unit are also available. In addition to automatic filling via
deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic
automatic dedusting is possible.
mütek baling presses are equipped with a control cabinet for the control system.
In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800
mm. However, the height can be adapted to your requirements on request.

The following advantages arise in the production of bales:
- simple and safe storage
- No loose dust
- Minimization of the storage volume
- Low transport volume

*Requirements for source material:
- dry (max. 30 % ATRO)
- Maximum length 35 mm

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.