Nam châm nóng chảy Neodymium, máy tách kim loạimütek
HAWK-EYE
Nam châm nóng chảy Neodymium, máy tách kim loại
mütek
HAWK-EYE
giá cố định chưa bao gồm thuế GTGT
5.990 €
năm sản xuất
2025
Tình trạng
Mới
Vị trí
Neckartailfingen 

Hình ảnh cho thấy
Hiển thị bản đồ
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
5.990 €
- Vị trí:
- Grienweg 38, 72666 Neckartailfingen, DE

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A3671440
- Số tham chiếu:
- Neodym
- Cập nhật:
- lần cuối vào ngày 27.05.2025
Mô tả
*Only the neodymium overbelt magnet is offered, not the conveyor belt underneath.
*Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets.
Extremely high degree of separation, depending on the bulk height and the starting material.
Probably the most compact overband magnet on the market.
The competition often uses the less powerful ferrite magnets to save costs.
dimensions approx.
Length: 104cm
Width: 22cm
Height: 28 cm (at the motor)
*Without controller
Surcharge for simple manual start/stop control + 495 €
A high-performance industrial neodymium magnet is installed.
High-performance neodymium magnet approx. 600x68x36.5 mm
* So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic.
Bjdpsdubpuofx Ab Nedi
This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site
Ideal for separating nails from wood chips.
Optionally also in a single-shaft shredder that is sucked off
Requirements:
*Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm
*Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm.
-----
Optional at extra charge:
Cross and ascending belt demonstrators from € 7,995 net
*Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets.
Extremely high degree of separation, depending on the bulk height and the starting material.
Probably the most compact overband magnet on the market.
The competition often uses the less powerful ferrite magnets to save costs.
dimensions approx.
Length: 104cm
Width: 22cm
Height: 28 cm (at the motor)
*Without controller
Surcharge for simple manual start/stop control + 495 €
A high-performance industrial neodymium magnet is installed.
High-performance neodymium magnet approx. 600x68x36.5 mm
* So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic.
Bjdpsdubpuofx Ab Nedi
This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site
Ideal for separating nails from wood chips.
Optionally also in a single-shaft shredder that is sucked off
Requirements:
*Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm
*Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm.
-----
Optional at extra charge:
Cross and ascending belt demonstrators from € 7,995 net
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2005
Gửi yêu cầu
Điện thoại & Fax
+49 711 5... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
quảng cáo nhỏ
Neckartailfingen
9.497 km
Nam châm ống, máy tách kim loại, nam châm
mütek SystemtechnikHawk-Eye
mütek SystemtechnikHawk-Eye
quảng cáo nhỏ
Neckartailfingen
9.497 km
Tấm nam châm khối nam châm Overband
mütekHawk-Eye
mütekHawk-Eye
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
























