Thiết bị phục vụ mùa đông / Máy rải muốiKugelmann
Sand und Salzsteuer Duplex Inox
Thiết bị phục vụ mùa đông / Máy rải muối
Kugelmann
Sand und Salzsteuer Duplex Inox
VB chưa bao gồm thuế GTGT
15.400 €
Năm sản xuất
2018
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Heidelberg 

Thông tin về máy móc
- Nhà sản xuất:
- Kugelmann
- Mô hình:
- Sand und Salzsteuer Duplex Inox
- Năm sản xuất:
- 2018
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
VB chưa bao gồm thuế GTGT
15.400 €
- cho thuê:
- có thể
- Vị trí:
- Tullastr. 3, 69126 Heidelberg, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A22176557
- Cập nhật:
- lần cuối vào ngày 22.06.2026
Mô tả
Duplex Inox
KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA
- Painted in RAL 2004 Holder Orange
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Speed-dependent spreader
- 2 augers and speed-dependent control
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Color: Holder Orange
Basic Duplex spreader:
- Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback).
- The application rate and spreading width are controlled via a microcomputer.
- The set spreading rate is speed-dependent and controlled according to the vehicle speed.
- For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards.
Standard equipment:
- Microprocessor control unit MCSS (for operation)
- Work lights can be switched on from the control panel
- Rotating beacon can be switched on from the control panel
- Partition between the spreading material chambers with equal division of the chamber volume (removable)
- Rubber skirting attached to the discharge chute
- Folding cover including operating cables
- Winter service marking
- Manual emergency operation of the hydraulic control valves (for operating the drives without control)
- Prepared for wet salt system (retrofitting only possible at the factory)
- Lighting system
- Angled roof frame
- Mounting frame and initial assembly of the spreader on the vehicle
- Rotating beacon and work lights
- Pre-carriage from the factory
Ppjdezf E Hqjpfx Ad Ssu
- Mounting kit Holder
LIST PRICE: € 22,515 (plus applicable VAT)
YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT)
The following option is available at an extra cost:
Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT)
Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee.
The sale is made with the exclusion of any guarantee or warranty.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA
- Painted in RAL 2004 Holder Orange
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Speed-dependent spreader
- 2 augers and speed-dependent control
- Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint.
- Color: Holder Orange
Basic Duplex spreader:
- Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback).
- The application rate and spreading width are controlled via a microcomputer.
- The set spreading rate is speed-dependent and controlled according to the vehicle speed.
- For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards.
Standard equipment:
- Microprocessor control unit MCSS (for operation)
- Work lights can be switched on from the control panel
- Rotating beacon can be switched on from the control panel
- Partition between the spreading material chambers with equal division of the chamber volume (removable)
- Rubber skirting attached to the discharge chute
- Folding cover including operating cables
- Winter service marking
- Manual emergency operation of the hydraulic control valves (for operating the drives without control)
- Prepared for wet salt system (retrofitting only possible at the factory)
- Lighting system
- Angled roof frame
- Mounting frame and initial assembly of the spreader on the vehicle
- Rotating beacon and work lights
- Pre-carriage from the factory
Ppjdezf E Hqjpfx Ad Ssu
- Mounting kit Holder
LIST PRICE: € 22,515 (plus applicable VAT)
YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT)
The following option is available at an extra cost:
Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT)
Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee.
The sale is made with the exclusion of any guarantee or warranty.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2005
23 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 172 6... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi








