Giá đỡ công xôn

Kragarmregal doppelseitig Höhe 4.160 mm Tiefe je Seite 1.200 mm / Länge 4.000 mm

Used double-sided cantilever racking: hot-dip galvanized bolted system

Scope of supply:
4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm
24 cantilever arms with 1,200 mm depth, standard
Including longitudinal and diagonal bracing for 1,300 mm center distance
Incl. fastening material (without floor anchors)

- (*Delivery time approx. 1 week)
- (*No damaged parts!)
- (*Spare parts can be reordered and expansion is possible at any time)
- (*Also available in larger quantities: 20 uprights in stock)

Hnodpfx Aheh Ek Dae Tot
Detailed description:
- Stable steel construction made of IPE profiles
- Surface of all components hot-dip galvanized
- Load capacity per upright side 2,250 kg
- Load capacity per cantilever arm 750 kg
- Cantilever arms height-adjustable in 100 mm increments
- Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard
= 4 storage levels on top of each other per upright side
- Including longitudinal and diagonal bracing for 1,300 mm distance
- Racking length 4,000 mm
- Including fastening material (without floor anchors)
- With assembly instructions and load signs C4 according to DIN standard

- Telephone technical advice
- Made in Germany
- Short delivery time
- On-site collection possible

Our cantilever racking is produced exclusively in Germany.
We offer reliable freight services with prior notification before delivery.
The material is packed in a way that allows for easy unloading.

When installed outdoors, the load capacities are reduced by the wind and snow load.
The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits.

The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended.
According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.