Hệ thống tiền xử lý

Klöpper Vertical washer 2600 R-L

Vertical infeed transport
- Vertical 2600 mm washing machine with drying
- Tilting table (behind the washing machine)
- Horizontal outfeed transport
- tilting table (discharge)

Description of Line Components

Lift
Electrical lifting and lowering, horizontal turning and tilting of loads.
Generation of vacuum via vacuum pump system with check and display of the vacuum power.
A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given.
Pos. 2 Vertical Inlet Transport WM
The vertical transport serves as inlet transport in front of the washing machine.
Pos. 3 Vertical Washing Machine with Drying
The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel.
The rubber rings of the transport rollers are resistant to cutting oil.
Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine.
The washing machine is equipped with energy and water saving cascade system.
Pre-rinsing section with
Flat jet spraying nozzles
Washing section with
3 pairs of brushes,
3 vats and
3 pumps
Acid section with
1 pair of brushes,
1 vat and
1 pump
Drying section with
2 pairs of drying nozzles provide dry edges.
Pos. 4 Vertical Inspection Transport with glass Activation Section
The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table.
Drive by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels.
Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection
The Klöpper Vertical washer 2600 R-L is an industrial vertical washing machine designed primarily for cleaning glass sheets as part of a processing line. It is an integral component often found in a larger system including loading stations and tilting tables.
Rodpswii Hfofx Ab Iep
Key Features and Components
Vertical Infeed Transport: Glass sheets are loaded vertically onto a tilting table from a glass rack, and then moved into the washer.
Washing & Drying Sections: The machine features a dedicated washing section and drying section.
Washing: The system uses a cascade system for energy and water savings. The pre-rinsing section utilizes flat jet spraying nozzles with city water to remove coarse dirt particles, which are led directly to the drain to reduce contamination of the de-ionized water (DI-water) circuit. The main washing section includes three pairs of brushes, three vats, and three pumps,
Drying: The drying section includes two pairs of drying nozzles to ensure dry edges.

R-L Configuration: The "R-L" in the name indicates the working direction, which is from right to left.
, inspection transport, and a tilting table at the discharge point for horizontal outfeed.
Total Height: The washing machine has a total height of approximately 2,600 mm