Xe nâng bốn hướngHubtex
MAXX 45
Xe nâng bốn hướng
Hubtex
MAXX 45
Giá cố định chưa bao gồm thuế GTGT
28.000 €
Năm sản xuất
2018
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Hövelhof 

Thông tin về máy móc
- Tên máy:
- Xe nâng bốn hướng
- Nhà sản xuất:
- Hubtex
- Mô hình:
- MAXX 45
- Số máy:
- R09940
- Năm sản xuất:
- 2018
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 1.000 h
Giá & Vị trí
Giá cố định chưa bao gồm thuế GTGT
28.000 €
- Vị trí:
- Heinz-Sallads-Straße 9, 33161 Hövelhof, Deutschland

Gọi điện
Chi tiết kỹ thuật
- Tải trọng:
- 4.500 kg
- Chiều cao nâng:
- 6.500 mm
- Nâng tự do:
- 2.052 mm
- Tâm tải trọng:
- 600 mm
- Loại nhiên liệu:
- điện
- Loại cột:
- triplex
- Công suất:
- 10 kW (13,60 mã lực)
- Loại truyền động bánh răng:
- tự động
- Nhà sản xuất pin:
- TABI
- Mẫu pin:
- 6 PzS 930
- Dung lượng pin:
- 930 A
- Dung lượng pin còn lại:
- 100 phần trăm
- Điện áp ắc quy:
- 48 V
- Trọng lượng pin:
- 1.337 kg
- Chiều rộng giá đỡ càng nâng:
- 3.400 mm
- Khoảng sáng gầm xe:
- 120 mm
- Bán kính quay (bên ngoài):
- 1.860 mm
- Tình trạng lốp:
- 75 phần trăm
- Loại lốp trước:
- lốp polyurethane (không để lại dấu vết)
- Kích thước lốp trước:
- 457 x 229 mm
- Loại lốp sau:
- lốp polyurethane (không để lại dấu vết)
- Kích thước lốp sau:
- 381 x 127 mm
- Trọng lượng tổng cộng:
- 7.200 kg
- Trọng lượng không tải:
- 5.900 kg
- Tổng chiều dài:
- 3.400 mm
- Tổng chiều rộng:
- 2.600 mm
- Màu sắc:
- xám
- Thiết bị:
- Chức năng thủy lực thứ 3, Chức năng thủy lực thứ 4, Kiểm tra an toàn UVV, cabin, lịch sử bảo dưỡng đầy đủ, bảo vệ đầu, bộ điều chỉnh vị trí càng nâng thủy lực, chiếu sáng
Chi tiết về đề nghị
- ID tin đăng:
- A22792445
- Cập nhật:
- lần cuối vào ngày 21.09.2026
Mô tả
HUBTEX MaxX 45 Electric Four-Way Reach Truck, 4.5 t, 6.5 m lifting height, 360° steering, cabin with cameras
We are selling our well-maintained HUBTEX MaxX 45 electric four-way reach truck (Series 2425-EL) from a private owner. The unit was used in our operation for one to one-and-a-half shifts for handling steel bars and bundles up to 6 m in length, both indoors and outdoors.
The MaxX 45 can travel longitudinally, laterally, in a circle, and diagonally. The new HUBTEX HX steering system with 360° continuous steering allows for changes in direction without stopping. This saves time and reduces tire wear. With a 4,500 kg standard load capacity, full free lift, and responsive proportional hydraulics, it is a powerful tool for handling long goods.
Technical specifications
Manufacturer / Type: HUBTEX MaxX 45, Series 2425-EL
Year of manufacture: 2018
Operating hours: 1000
Drive: Electric, three-phase technology, 2 × 5.0 kW drive motors (S2 60 min), lifting motor 25.5 kW, steering motor 4 kW
Load capacity: 4,500 kg up to 4,000 mm, 3,700 kg up to 5,500 mm, 3,000 kg up to 6,500 mm (load center of gravity 600 mm)
Mast: 3-stage, H45 TI GNX, full free lift
Lifting height: 6,500 mm
Lowered height: 3,205 mm
Free lift: 2,052 mm
Extended height: 7,653 mm
Working width: 1,400 mm
Frame width: 2,600 mm
Frame length: 2,500 mm
Overall length over fork carriage: 3,400 mm
Turning radius: approx. 1,860 mm
Working aisle width: 3,600 mm including safety distance
Kjdpfx Acjz Dwi So Dodt
Travel speed: approx. 11 km/h with and without load
Gradeability: 6 %
Tires: Elastomeric/solid rubber all around (drive tires 457 × 229 mm, load tires 381 × 127 mm), [non-marking tires: yes/no]
Battery: 48 V, 6 EPzS, 930 Ah, with Aquamatik and electrolyte circulation, fork pockets for battery replacement
Charger: HUBTEX HF charger D 400 G 48/170, charging time approx. 5.5–6 h, 400 V
Filling station: 60 l
Equipment
Long load fork carriage Type III, 3,400 mm
Hydraulic fork adjustment (560–2,500 mm) and fork tilt (+5° / −3°)
Comfort panoramic transverse seat cabin Q 900, vibration-damped, with safety glass all around incl. roof, without door
Spring-mounted, multi-adjustable comfort seat with seat switch
Multi-function joystick, right armrest with standing joystick, storage compartment with lid
On-board computer HIT2 with color display (operating hours, battery level, maintenance intervals, steering program, wheel position)
Camera in the inner mast and second camera on the outer mast, LED color monitor with switching function
4 LED work lights on the cabin roof
Hydraulic level adjustment, constant ground contact of all 4 wheels
Maintenance-free counter-rotating brake, electromagnetic parking brake, energy recovery during braking
Horizontal mast end bearing damping
1 pair of pallet forks, 1,400 mm
Paint finish: Cabin, battery and hydraulics RAL 2008, chassis RAL 7040, mast RAL 7021
Location: 33161 Hövelhof (viewing by appointment)
Price: 28,000.00 €, plus VAT.
Sale from business to business. Information without guarantee, subject to prior sale.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
We are selling our well-maintained HUBTEX MaxX 45 electric four-way reach truck (Series 2425-EL) from a private owner. The unit was used in our operation for one to one-and-a-half shifts for handling steel bars and bundles up to 6 m in length, both indoors and outdoors.
The MaxX 45 can travel longitudinally, laterally, in a circle, and diagonally. The new HUBTEX HX steering system with 360° continuous steering allows for changes in direction without stopping. This saves time and reduces tire wear. With a 4,500 kg standard load capacity, full free lift, and responsive proportional hydraulics, it is a powerful tool for handling long goods.
Technical specifications
Manufacturer / Type: HUBTEX MaxX 45, Series 2425-EL
Year of manufacture: 2018
Operating hours: 1000
Drive: Electric, three-phase technology, 2 × 5.0 kW drive motors (S2 60 min), lifting motor 25.5 kW, steering motor 4 kW
Load capacity: 4,500 kg up to 4,000 mm, 3,700 kg up to 5,500 mm, 3,000 kg up to 6,500 mm (load center of gravity 600 mm)
Mast: 3-stage, H45 TI GNX, full free lift
Lifting height: 6,500 mm
Lowered height: 3,205 mm
Free lift: 2,052 mm
Extended height: 7,653 mm
Working width: 1,400 mm
Frame width: 2,600 mm
Frame length: 2,500 mm
Overall length over fork carriage: 3,400 mm
Turning radius: approx. 1,860 mm
Working aisle width: 3,600 mm including safety distance
Kjdpfx Acjz Dwi So Dodt
Travel speed: approx. 11 km/h with and without load
Gradeability: 6 %
Tires: Elastomeric/solid rubber all around (drive tires 457 × 229 mm, load tires 381 × 127 mm), [non-marking tires: yes/no]
Battery: 48 V, 6 EPzS, 930 Ah, with Aquamatik and electrolyte circulation, fork pockets for battery replacement
Charger: HUBTEX HF charger D 400 G 48/170, charging time approx. 5.5–6 h, 400 V
Filling station: 60 l
Equipment
Long load fork carriage Type III, 3,400 mm
Hydraulic fork adjustment (560–2,500 mm) and fork tilt (+5° / −3°)
Comfort panoramic transverse seat cabin Q 900, vibration-damped, with safety glass all around incl. roof, without door
Spring-mounted, multi-adjustable comfort seat with seat switch
Multi-function joystick, right armrest with standing joystick, storage compartment with lid
On-board computer HIT2 with color display (operating hours, battery level, maintenance intervals, steering program, wheel position)
Camera in the inner mast and second camera on the outer mast, LED color monitor with switching function
4 LED work lights on the cabin roof
Hydraulic level adjustment, constant ground contact of all 4 wheels
Maintenance-free counter-rotating brake, electromagnetic parking brake, energy recovery during braking
Horizontal mast end bearing damping
1 pair of pallet forks, 1,400 mm
Paint finish: Cabin, battery and hydraulics RAL 2008, chassis RAL 7040, mast RAL 7021
Location: 33161 Hövelhof (viewing by appointment)
Price: 28,000.00 €, plus VAT.
Sale from business to business. Information without guarantee, subject to prior sale.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần cuối trực tuyến: Hôm nay
Đã đăng ký từ: 2017
1 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 5257 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Helmstedt
9.273 km
Thép xây dựng cho cần cẩu
no nameStahlkonstruktion fuer Krananlage
no nameStahlkonstruktion fuer Krananlage
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Częstochowa
8.749 km
WEIMA WL6S 22KW (máy nghiền công nghiệp, 22 kW)
WEIMAWL 6 S
WEIMAWL 6 S
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Helmstedt
9.273 km
Thép xây dựng cho cần cẩu
no nameStahlkonstruktion fuer Krananlage
no nameStahlkonstruktion fuer Krananlage
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Częstochowa
8.749 km
WEIMA WL6S 22KW
WEIMAWL 6 S
WEIMAWL 6 S
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Barntrup
9.399 km
Máy phay tạo rãnh ngang / gia công tạo biên cuối
MarinusPowermax Endmatcher 300
MarinusPowermax Endmatcher 300
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Egenhofen
9.372 km
Độ dày cắt đường
RoblandD510 - Tersa
RoblandD510 - Tersa
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Helmstedt
9.273 km
Thép xây dựng cho cần cẩu
no nameStahlkonstruktion fuer Krananlage
no nameStahlkonstruktion fuer Krananlage
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Merishausen
9.569 km
Sievemachine
RW Recycling World GmbHKSM diverse
RW Recycling World GmbHKSM diverse
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Falkenberg
9.058 km
Dòng tường
Randek ABWall Line
Randek ABWall Line
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
United States
13.813 km
Đường cắt theo chiều dài
Dahlstrom60″ x .135″ x 20,000Lb
Dahlstrom60″ x .135″ x 20,000Lb
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi




































































































