Máy xén ba lưỡi dao tự động biến đổiHorizon
HT-1000V Variable Trimmer
Máy xén ba lưỡi dao tự động biến đổi
Horizon
HT-1000V Variable Trimmer
năm sản xuất
2019
Tình trạng
Đã qua sử dụng
Vị trí
Wakefield 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Nhà sản xuất:
- Horizon
- Mô hình:
- HT-1000V Variable Trimmer
- Năm sản xuất:
- 2019
- Tình trạng:
- rất tốt (đã qua sử dụng)
Giá & Vị trí
- Vị trí:
- Unit 1A Thornes Lane Wharf, WF1 5RF Wakefield, GB

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A19428751
- Số tham chiếu:
- 10965
- Cập nhật:
- lần cuối vào ngày 25.06.2025
Mô tả
Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer
ONLY 1.7M books trimmed!
Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes.
Perfect for short run production, and book of one production which can be achieved through barcode driven set-up.
Features:
Setup automatically on the fly by reading a barcode at the entrance of the trimmer.
Also capable of automatic set-up from the operator panel for same size production runs.
One-to-one book production with variable sizes can be produced.
Both untrimmed and trimmed sizes can be variable, for true variable format production.
Can be used solo or placed in-line with Horizon perfect binders.
Specification:
Untrimmed Book Size:
Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600”
Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”.
Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130”
Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”.
Trim Width:
Bodpfx Ajwu Sptjb Nsdi
Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04”
Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04”
Trim Height:
1 to 65 mm/ 0.04” to 2.560”
Production Speed:
400 to 1,000 cycles per hour (Higher production can be reached with piled books)
ONLY 1.7M books trimmed!
Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes.
Perfect for short run production, and book of one production which can be achieved through barcode driven set-up.
Features:
Setup automatically on the fly by reading a barcode at the entrance of the trimmer.
Also capable of automatic set-up from the operator panel for same size production runs.
One-to-one book production with variable sizes can be produced.
Both untrimmed and trimmed sizes can be variable, for true variable format production.
Can be used solo or placed in-line with Horizon perfect binders.
Specification:
Untrimmed Book Size:
Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600”
Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”.
Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130”
Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”.
Trim Width:
Bodpfx Ajwu Sptjb Nsdi
Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04”
Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04”
Trim Height:
1 to 65 mm/ 0.04” to 2.560”
Production Speed:
400 to 1,000 cycles per hour (Higher production can be reached with piled books)
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2021
Gửi yêu cầu
Điện thoại & Fax
+44 1924 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi





