Cưa tường DST 20-CAHilti
DST 20
Cưa tường DST 20-CA
Hilti
DST 20
EXW VB chưa bao gồm thuế GTGT
68.000 €
Năm sản xuất
2021
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Paderborn 

Thông tin về máy móc
- Tên máy:
- Cưa tường DST 20-CA
- Nhà sản xuất:
- Hilti
- Mô hình:
- DST 20
- Số máy:
- 13510
- Năm sản xuất:
- 2021
- Tình trạng:
- gần như mới (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 7 h
Giá & Vị trí
EXW VB chưa bao gồm thuế GTGT
68.000 €
- Vị trí:
- Paderborn, Đức

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A22201027
- Số tham chiếu:
- 300093422459
- Cập nhật:
- lần cuối vào ngày 29.06.2026
Mô tả
Kaufering, April 2019 – At bauma 2019 in Munich, Hilti demonstrated the latest generation of its DST wall saw, featuring fully integrated control electronics and significantly increased productivity: the DST 20-CA diamond wall saw.
The new DST 20-CA electric diamond wall saw from Hilti is extremely compact and easy to handle. As the world’s first 32A electric high-frequency wall saw, it weighs approximately 60 percent less, has a maximum cutting depth of up to 73 cm with a 1600 mm blade, and comes with integrated electronics. The DST 20-CA diamond saw does not require an external electrical box, thus reducing the risk of cable breakage and simplifying the work process.
Hands and mind free
The cutting process is optimized by an integrated CutAssist system, which ensures a 15 percent higher cutting speed. The user only needs to set the necessary parameters, press the start button, and the Hilti DST 20-CA begins its work. This keeps the user’s hands free, allowing them to perform other tasks in parallel, such as preparing the next work steps. This saves time and makes diamond sawing operations significantly more efficient. The remote control, operating on the 2400 MHz band with frequency hopping technology and a range of approximately 20 meters, displays the cutting depth in real time on the display.
Fast setup and configuration
Thanks to the elimination of an additional electrical box, the low weight, and improved ergonomics, the wall saw can be set up quickly. Long setup and transport times are eliminated, allowing the user to begin diamond sawing quickly. The vibration-optimized DST 20-CA wall saw impresses with its performance. Compared to the DS-TS 20-E wall saw, it delivers 30 percent more power and 200 percent more torque. As a result, the saw can be used in a wide range of applications: cutting openings and penetrations in concrete, demolishing walls and floors, separating and cutting artificial or natural stone, and even cutting heavily reinforced concrete – all of which can be easily accomplished with the new wall saw, even in hard-to-reach areas.
Hodpfezgu Adex Ad Ssp
Included: guide rail DS-R230-L
guide rail DS-R200L
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
The new DST 20-CA electric diamond wall saw from Hilti is extremely compact and easy to handle. As the world’s first 32A electric high-frequency wall saw, it weighs approximately 60 percent less, has a maximum cutting depth of up to 73 cm with a 1600 mm blade, and comes with integrated electronics. The DST 20-CA diamond saw does not require an external electrical box, thus reducing the risk of cable breakage and simplifying the work process.
Hands and mind free
The cutting process is optimized by an integrated CutAssist system, which ensures a 15 percent higher cutting speed. The user only needs to set the necessary parameters, press the start button, and the Hilti DST 20-CA begins its work. This keeps the user’s hands free, allowing them to perform other tasks in parallel, such as preparing the next work steps. This saves time and makes diamond sawing operations significantly more efficient. The remote control, operating on the 2400 MHz band with frequency hopping technology and a range of approximately 20 meters, displays the cutting depth in real time on the display.
Fast setup and configuration
Thanks to the elimination of an additional electrical box, the low weight, and improved ergonomics, the wall saw can be set up quickly. Long setup and transport times are eliminated, allowing the user to begin diamond sawing quickly. The vibration-optimized DST 20-CA wall saw impresses with its performance. Compared to the DS-TS 20-E wall saw, it delivers 30 percent more power and 200 percent more torque. As a result, the saw can be used in a wide range of applications: cutting openings and penetrations in concrete, demolishing walls and floors, separating and cutting artificial or natural stone, and even cutting heavily reinforced concrete – all of which can be easily accomplished with the new wall saw, even in hard-to-reach areas.
Hodpfezgu Adex Ad Ssp
Included: guide rail DS-R230-L
guide rail DS-R200L
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2026
1 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 1514 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
























