Xây dựng hội trườngGraeff
Leichtbauhalle
Xây dựng hội trường
Graeff
Leichtbauhalle
VB chưa bao gồm thuế GTGT
20.000 €
Năm sản xuất
2000
Tình trạng
Đã qua sử dụng
(chức năng bị giới hạn)
Vị trí
Frankenthal (Pfalz) 

Dữ liệu cơ bản
- Tên máy:
- Xây dựng hội trường
- Nhà sản xuất:
- Graeff
- Mô hình:
- Leichtbauhalle
- Năm sản xuất:
- 2000
- Tình trạng:
- sẵn sàng sử dụng (đã qua sử dụng)
- Tính năng hoạt động:
- chức năng bị giới hạn
Giá & Vị trí
VB chưa bao gồm thuế GTGT
20.000 €
- Vị trí:
- Frankenthal, 67227 Frankenthal (Pfalz), Deutschland

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Tổng chiều dài:
91.000 mm
Tổng chiều rộng:
16.000 mm
Tổng chiều cao:
4.500 mm
Chi tiết về đề nghị
- ID tin đăng:
- A23327045
- Cập nhật:
- lần cuối vào ngày 18.11.2026
Mô tả
The halls are constructed from galvanized steel sheet. The vertical supports (Figure 2) are also made of double-layer galvanized sheet and are not concreted in. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, onto which the hall framework was placed and screwed. (20 mm nuts)
Ijds Ai Rmgjpfx Ah Nebd
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.
We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!
Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Ijds Ai Rmgjpfx Ah Nebd
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.
We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!
Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2026
10 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 6122 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Frankenthal (Pfalz)
9.531 km
Xây dựng hội trường
GraeffLeichtbauhalle
GraeffLeichtbauhalle
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Bielefeld
9.441 km
Máy doa bàn
WMW UNION HECKERTBFT 130/7 + TNC 145
WMW UNION HECKERTBFT 130/7 + TNC 145
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Đức
9.202 km
Máy cưa vòng - dọc
MÖSSNER-REKORDSM 320
MÖSSNER-REKORDSM 320
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Nanjing
2.238 km
Dụng cụ uốn cho Bystronic
CnstampBystronic P5 RFA Style H250mm Punch
CnstampBystronic P5 RFA Style H250mm Punch
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Debrecen
8.624 km
Máy mài trục khuỷu
SledumRG-270
SledumRG-270
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Nattheim
9.425 km
Trung tâm gia công CNC
MorbidelliAuthor X5 44 Evo
MorbidelliAuthor X5 44 Evo
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Neuss
9.586 km
John Deere Gator 4x2 XUV855D S4
John DeereGator 4x2 XUV855D S4
John DeereGator 4x2 XUV855D S4
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Bitburg
9.643 km
Máy cưa bàn trượt
Martin - Sonderpreis -T 77 - sofort verfügbar -
Martin - Sonderpreis -T 77 - sofort verfügbar -
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Hessisch Lichtenau
9.387 km
Máy chấn CNC với gá sau 6 trục và điều khiển CYBELEC, máy chấn tôn, máy ép chấn,
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
BEYELER - BYSTRONICPR 8 (2500 kN x 3100 mm)
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Thurmaston
10.030 km
Trung tâm tiện và phay CNC
DOOSANPuma 2600SY
DOOSANPuma 2600SY
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi

























































































