Xe van thùng kínford
Transit Custom 280 TDCI L1H1 COC KLIMA
Xe van thùng kín
ford
Transit Custom 280 TDCI L1H1 COC KLIMA
giá cố định chưa bao gồm thuế GTGT
5.500 €
Năm sản xuất
2018
Tình trạng
Đã qua sử dụng
Vị trí
Rohrbach 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
5.500 €
- Vị trí người bán:
- Hauptstraße 90, 76865 Rohrbach, Đức

Gọi điện
Chi tiết kỹ thuật
- Số km đã đi:
- 49.383 km
- Công suất:
- 77 kW (104,69 mã lực)
- Đăng ký lần đầu:
- 09/2018
- Loại nhiên liệu:
- diesel
- Trọng lượng không tải:
- 1.956 kg
- Trọng lượng tải tối đa:
- 844 kg
- Trọng lượng tổng cộng:
- 2.800 kg
- Chiều dài cơ sở:
- 2.933 mm
- Kiểm định tiếp theo (TÜV):
- 07/2026
- Nhiên liệu:
- diesel
- Phát thải CO₂:
- 167 g/km
- Mức tiêu thụ nhiên liệu (đô thị):
- 7,4 lít/100 km
- Mức tiêu thụ nhiên liệu (ngoài đô thị):
- 5,9 lít/100 km
- Mức tiêu thụ nhiên liệu (kết hợp):
- 6,4 lít/100 km
- Màu sắc:
- trắng
- Cabin lái:
- khác
- Loại truyền động bánh răng:
- cơ khí
- Hạng mục khí thải:
- Euro 6
- Hệ thống treo:
- khác
- Số chỗ ngồi:
- 2
- Tổng chiều dài:
- 4.972 mm
- Chiều dài không gian chứa hàng:
- 2.411 mm
- Chiều cao xây dựng:
- 1.970 mm
- Thiết bị:
- ABS, bộ lọc muội than, chương trình cân bằng điện tử (ESP), hệ thống chống trộm (immobilizer), khóa trung tâm, kiểm soát hành trình, túi khí, điều hòa không khí
Chi tiết về đề nghị
- ID tin đăng:
- A18130586
- Số tham chiếu:
- 24414_124
- Cập nhật:
- lần cuối vào ngày 24.11.2025
Mô tả
Engine failure.
This used Ford Transit Custom 280 TDCI L1H1 COC AIR CONDITIONING, built in 2018, has a mileage of 49,383 km and is equipped with a 2.0-liter diesel engine with an output of 77 kW (105 hp). The van is front-wheel drive and offers an environmentally friendly Euro 6 emissions standard with a green environmental sticker. Fuel consumption is 6.4 l/100 km in the combined cycle. This model is equipped with a manual transmission.
It offers extensive safety features such as driver and passenger airbags, emergency braking assist, intelligent acceleration control, and crosswind assist.
Rodpfx Abjvlly Ie Isp
Comfort features include air conditioning, front and rear parking sensors, heated seats, and a Bluetooth hands-free system. The cargo area is half-lined and features LED lighting. The sliding door on the right and the conventional wing doors allow for flexible loading scenarios.
The vehicle is particularly suitable for commercial users or export
and can be delivered within Germany for an additional charge.
Viewings are possible without an appointment. Please note that the Transit has engine damage.
Special equipment:
Passenger-side airbag, audio system: radio with USB and Bluetooth hands-free system, 240 A generator, B-pillar grab handle, LED cargo area light, front and rear parking sensors, Seat Package 10: driver's seat (4-way adjustable) - single passenger seat including side airbag and seat heating, fabric, half-height trim in the cargo/engine compartment, 80 Ah AGM battery (2 batteries)
Additional equipment:
Driver's side airbag, basic version, indicator light integrated in the exterior mirror, on-board computer, electronic brake force distribution (EBD), electronic brake assist. Traction control, Driver assistance system: Hill start assist, Driver assistance system: Intelligent acceleration control, Driver assistance system: Emergency brake assist, Driver assistance system: Crosswind assist, Lockable glove compartment, Rear wing doors without glass (opening angle 180 degrees), Body/structure: High-capacity van, Body variant: Medium-high roof, Height/length adjustable steering column (steering wheel), Truck registration, Model update, Engine: 2.0 liter - 77 kW TDCi CAT, Wheelbase: 2933 mm, Spare tire in standard tires, Low emissions according to Euro 6 emissions standard, Adjustable intermittent windshield wipers, H4 headlights, Sliding door for the right-hand cargo/passenger compartment, Mud flaps front and rear, Side protection strips, Tie-down eyes (8), Lightly tinted heat-insulating glass
COC is present
Sale only to businesses (agriculture, freelancers, small businesses)
and large-scale commercial use) or export. Errors and prior sale excepted.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
This used Ford Transit Custom 280 TDCI L1H1 COC AIR CONDITIONING, built in 2018, has a mileage of 49,383 km and is equipped with a 2.0-liter diesel engine with an output of 77 kW (105 hp). The van is front-wheel drive and offers an environmentally friendly Euro 6 emissions standard with a green environmental sticker. Fuel consumption is 6.4 l/100 km in the combined cycle. This model is equipped with a manual transmission.
It offers extensive safety features such as driver and passenger airbags, emergency braking assist, intelligent acceleration control, and crosswind assist.
Rodpfx Abjvlly Ie Isp
Comfort features include air conditioning, front and rear parking sensors, heated seats, and a Bluetooth hands-free system. The cargo area is half-lined and features LED lighting. The sliding door on the right and the conventional wing doors allow for flexible loading scenarios.
The vehicle is particularly suitable for commercial users or export
and can be delivered within Germany for an additional charge.
Viewings are possible without an appointment. Please note that the Transit has engine damage.
Special equipment:
Passenger-side airbag, audio system: radio with USB and Bluetooth hands-free system, 240 A generator, B-pillar grab handle, LED cargo area light, front and rear parking sensors, Seat Package 10: driver's seat (4-way adjustable) - single passenger seat including side airbag and seat heating, fabric, half-height trim in the cargo/engine compartment, 80 Ah AGM battery (2 batteries)
Additional equipment:
Driver's side airbag, basic version, indicator light integrated in the exterior mirror, on-board computer, electronic brake force distribution (EBD), electronic brake assist. Traction control, Driver assistance system: Hill start assist, Driver assistance system: Intelligent acceleration control, Driver assistance system: Emergency brake assist, Driver assistance system: Crosswind assist, Lockable glove compartment, Rear wing doors without glass (opening angle 180 degrees), Body/structure: High-capacity van, Body variant: Medium-high roof, Height/length adjustable steering column (steering wheel), Truck registration, Model update, Engine: 2.0 liter - 77 kW TDCi CAT, Wheelbase: 2933 mm, Spare tire in standard tires, Low emissions according to Euro 6 emissions standard, Adjustable intermittent windshield wipers, H4 headlights, Sliding door for the right-hand cargo/passenger compartment, Mud flaps front and rear, Side protection strips, Tie-down eyes (8), Lightly tinted heat-insulating glass
COC is present
Sale only to businesses (agriculture, freelancers, small businesses)
and large-scale commercial use) or export. Errors and prior sale excepted.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2002
Gửi yêu cầu
Điện thoại & Fax
+49 6349 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Đức
9.489 km
Máy nghiền búa BOLLEGRAF (điều 10034)
BOLLEGRAFAS 75/850
BOLLEGRAFAS 75/850
Quảng cáo nhỏ
Zuzenhausen
9.506 km
Máy hủy tài liệu
ZERMAZRS
ZERMAZRS
Quảng cáo nhỏ
Eilenburg
9.181 km
Xe van thùng kín
FORDTransit Custom Kasten 310 L1H1 Basis Klima PDC
FORDTransit Custom Kasten 310 L1H1 Basis Klima PDC
Quảng cáo nhỏ
Veghel
9.653 km
Máy phay Wattsan M3 1325
WattsanM3 1325
WattsanM3 1325
Quảng cáo nhỏ
Berlin
9.110 km
Xe bán tải
PEUGEOTBoxer Euro 5 3,80m
PEUGEOTBoxer Euro 5 3,80m
Quảng cáo nhỏ
Trenčianske Stankovce
8.866 km
Arburg 221 KS 350-100 dọc/ngang (chỉ 34.748 giờ hoạt động!)
Arburg221 KS 350-100
Arburg221 KS 350-100
Quảng cáo nhỏ
Veghel
9.653 km
Máy laser Wattsan 1610 Duos ST
Wattsan1610 Duos ST
Wattsan1610 Duos ST
Quảng cáo nhỏ
Siedlce
8.515 km
Máy phay gỗ CNC
CORMAKFrezarka CNC CORMAK C2141 ATC
CORMAKFrezarka CNC CORMAK C2141 ATC
Quảng cáo nhỏ
Petrovče
9.127 km
Máy hủy tài liệu
Robust¸Reuser SD 700/22 kW
Robust¸Reuser SD 700/22 kW
Quảng cáo nhỏ
Siedlce
8.515 km
Máy phay gỗ CNC
CORMAKC2030 PREMIUM 2100x3100mm
CORMAKC2030 PREMIUM 2100x3100mm
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi








































































































