Hoán đổi khung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung

giá cố định chưa bao gồm thuế GTGT
24.700 €
Tình trạng
Mới
Vị trí
Triptis Đức
Hoán đổi khung Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Hoán đổi khung Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Hoán đổi khung Fliegl TWP 180 Jumbo Z mit Staplerhalterung
more Images
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Fliegl TWP 180 Jumbo Z mit Staplerhalterung
Hình ảnh cho thấy
Hiển thị bản đồ

Thông tin về máy móc

Tên máy:
Hoán đổi khung
Nhà sản xuất:
Fliegl
Mô hình:
TWP 180 Jumbo Z mit Staplerhalterung
Số máy:
207ad28f83705ed0d38a4f174
Tình trạng:
mới

Giá & Vị trí

giá cố định chưa bao gồm thuế GTGT
24.700 €
Vị trí người bán:
Oberpöllnitzer Straße 8, 07819 Triptis, Đức Đức
Gọi điện

Chi tiết kỹ thuật

Trọng lượng không tải:
3 kg
Trọng lượng tải tối đa:
11 kg
Trọng lượng tổng cộng:
14 kg
Cấu hình trục:
2 trục
Kích thước lốp xe:
235/75 r17,5

Chi tiết về đề nghị

ID tin đăng:
A8265536
Số tham chiếu:
20437522
Cập nhật:
lần cuối vào ngày 22.10.2024

Mô tả

Further information
Chassis Wechel central axle trailer
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
Phsdpfoi Ri Iajx Ac Dea
4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude)
Telescopic front support leg
1 pair of front gear support legs, with straight lower section and single-sided operation in FR right
Wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Half-shell mudguards
Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies
Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required
Towing device central axle trailer
Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered)
Lower coupler drawbar
without length adjustment drawbar
Axles + suspension
SAF drum brake axles of the manufacturer's choice
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-applied parking brake
Duomatic connection at the front, with connection line to the engine trolley, in FR-left
Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right
EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in each case in lowering / lifting position
Vehicle - driving stability system
Wheels and tires
235/75 R17.5 tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position!
2 white position lights at the front
2 white/red rear lane departure lights
1 x 15-pin plug at the front, with connecting cable, in FR-left
2 x 7-pin sockets in FR left rear for truck-mounted forklift
1 x 15-pin socket in FR left rear for truck-mounted forklift
LED work lights on both sides behind the 2nd axle (switched via reversing light)
Additional LED work light(s) at the rear, switched via reversing light
Approval / plates
Germany
with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Paint finish
Frame

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.

Nhà cung cấp

Đã đăng ký từ: 2006

151 Quảng cáo trực tuyến

Gọi điện

Gửi yêu cầu

đấtus 
Đức
Áo
Thụy Sĩ
Hoa Kỳ
Vương quốc Liên hiệp Anh
Pháp
Bỉ
Tây Ban Nha
Mexico
Ý
Hà Lan
Ba Lan
Liên bang Nga
Belarus (Cộng hòa Belarus)
Ukraina
Estonia
Thổ Nhĩ Kỳ
New Zealand
Ai-len
Cộng hòa Séc
Đan Mạch
Phần Lan
Thụy Điển
Na Uy
Luxembourg
Hy Lạp
Litva
Latvia
Iceland
Bồ Đào Nha
Braxin
Venezuela
Argentina
Hungary
Slovakia
Rumani
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Bắc Macedonia
Bosnia và Hercegovina
Israel
Ai Cập
Ma-rốc
Ấn Độ
Indonesia
Hàn Quốc
Nhật Bản
Thái Lan
Malaysia
Việt Nam
China
Đài Loan
Iran
Bangladesh
Lưu ý: Yêu cầu của bạn sẽ được chuyển tới tất cả người bán trong danh mục máy móc. Nhờ vậy, bạn có thể nhận được rất nhiều lời đề nghị.
Không thể gửi yêu cầu. Vui lòng thử lại sau.

Điện thoại & Fax

+49 36482... quảng cáo