Bộ trao đổi nhiệtEvapco Air Solutions a/s
TKZ Heat Exchanger
Bộ trao đổi nhiệt
Evapco Air Solutions a/s
TKZ Heat Exchanger
FCA VB chưa bao gồm thuế GTGT
2.500 €
Năm sản xuất
2018
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Bergen op Zoom 

Dữ liệu cơ bản
- Tên máy:
- Bộ trao đổi nhiệt
- Nhà sản xuất:
- Evapco Air Solutions a/s
- Mô hình:
- TKZ Heat Exchanger
- Năm sản xuất:
- 2018
- Tình trạng:
- sẵn sàng sử dụng (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
FCA VB chưa bao gồm thuế GTGT
2.500 €
- Vị trí:
- Bergen op Zoom, Hà Lan

Gọi điện
Chi tiết kỹ thuật
Hệ thống thủy lực
Áp suất làm việc:
10 thanh
Chi tiết công suất
Điện áp đầu vào:
400 V
Tần số đầu vào:
50 Hz
Dòng điện đầu vào:
3 A
Loại dòng điện đầu vào:
ba pha
Tài liệu và chứng nhận
Có sẵn biển kiểu
Chi tiết về đề nghị
- ID tin đăng:
- A23348684
- Cập nhật:
- lần cuối vào ngày 17.11.2026
Mô tả
The model designation EVAPCO TKZ-700-800-7-20-2.0-B5 refers to a custom-made finned heat exchanger.
Explanation of the model code:
• TKZ (series/design). Indicates the specific coil or design series – dry cooler.
• 700 (coil height/width in mm). Indicates the finned height (or width) of the heat exchanger block, which is 700 mm.
Ibodj Akvrpspfx Afwsd
• 800 (coil length in mm). Indicates the finned length (tube length) of the coil, which is 800 mm.
• 7 (tube rows). Indicates the number of tube rows arranged one behind the other in the direction of airflow (7 rows).
• 20 (circuits). Typically indicates the number of parallel tube circuits or the tube spacing.
• 2.0 (fin spacing in mm). Indicates the distance between the individual heat exchanger fins (2.0 mm), which is typical for applications where ice formation or increased dirt accumulation is possible.
The operating hours are unknown, but are assumed to be low, as the heat exchanger was used in a research and development laboratory.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Explanation of the model code:
• TKZ (series/design). Indicates the specific coil or design series – dry cooler.
• 700 (coil height/width in mm). Indicates the finned height (or width) of the heat exchanger block, which is 700 mm.
Ibodj Akvrpspfx Afwsd
• 800 (coil length in mm). Indicates the finned length (tube length) of the coil, which is 800 mm.
• 7 (tube rows). Indicates the number of tube rows arranged one behind the other in the direction of airflow (7 rows).
• 20 (circuits). Typically indicates the number of parallel tube circuits or the tube spacing.
• 2.0 (fin spacing in mm). Indicates the distance between the individual heat exchanger fins (2.0 mm), which is typical for applications where ice formation or increased dirt accumulation is possible.
The operating hours are unknown, but are assumed to be low, as the heat exchanger was used in a research and development laboratory.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Trực tuyến lần cuối: Hôm qua
Đã đăng ký từ: 2026
19 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+43 660 2... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi














