Thiết bị kiểm tra an toànEaton
Sefelec 506-S
Thiết bị kiểm tra an toàn
Eaton
Sefelec 506-S
năm sản xuất
2023
Tình trạng
Đã qua sử dụng
Vị trí
Viersen 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Thiết bị kiểm tra an toàn
- nhà sản xuất:
- Eaton
- Mô hình:
- Sefelec 506-S
- năm sản xuất:
- 2023
- Tình trạng:
- rất tốt (đã qua sử dụng)
- tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- 41748 Viersen-Ummer, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20368890
- Số tham chiếu:
- 8312-1
- cập nhật:
- lần cuối vào ngày 24.10.2025
Mô tả
Safety Tester for High Voltage Test Station
- EATON Sefelec 506-S
The device was purchased in 2023 and is in excellent condition.
The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements.
The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection.
The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench.
The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation.
- Standard interfaces: Ethernet / RS232 / USB / PLC
- Optional: IEEE488-2 interface
- Dual safety circuit SIL2
- Automatic selection of test series
- Sequence mode for combining multiple consecutive tests
Withstand voltage at 5kVAC 500VA and 6kVDC
Detection modes by current threshold or current fluctuations (ΔI)
Burn function mode without current detection
Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC
Optional: 2TΩ range
PE testing at 32A - 8VAC, measurement 0 ... 1Ω
Optional: testing current 50A
Lrodoxqxt Iepfx Adleu
Programmable test ramps
Ramp up, hold, ramp down
Multi-ramp mode, up to 7 steps
TFT touchscreen 7", 16 million colors, for programming and display of current tests and results
Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability
Integrated DSP for higher test speeds
Large internal memory for storing configurations and test results
Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength)
Shipping is possible upon arrangement.
#8312-1
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
- EATON Sefelec 506-S
The device was purchased in 2023 and is in excellent condition.
The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements.
The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection.
The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench.
The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation.
- Standard interfaces: Ethernet / RS232 / USB / PLC
- Optional: IEEE488-2 interface
- Dual safety circuit SIL2
- Automatic selection of test series
- Sequence mode for combining multiple consecutive tests
Withstand voltage at 5kVAC 500VA and 6kVDC
Detection modes by current threshold or current fluctuations (ΔI)
Burn function mode without current detection
Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC
Optional: 2TΩ range
PE testing at 32A - 8VAC, measurement 0 ... 1Ω
Optional: testing current 50A
Lrodoxqxt Iepfx Adleu
Programmable test ramps
Ramp up, hold, ramp down
Multi-ramp mode, up to 7 steps
TFT touchscreen 7", 16 million colors, for programming and display of current tests and results
Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability
Integrated DSP for higher test speeds
Large internal memory for storing configurations and test results
Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength)
Shipping is possible upon arrangement.
#8312-1
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+49 2162 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
quảng cáo nhỏ
Viersen
9.606 km
Thiết bị kiểm tra an toàn
EatonSefelec 506-S + 64-SC
EatonSefelec 506-S + 64-SC
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi














































