Băng chuyền

die magnetprofis Z-Förderband

Used machine, year of manufacture 2023
Tested, roughly cleaned!
Inspection welcome!

Fgedowx Hxdopfx Aczoh
Aluminum Z-type conveyor belt with substructure including adjustable feet and machine feet for compensating uneven floors.
1st horizontal section: 1,700 mm
Inclined section: 2,800 mm
2nd horizontal section: 800 mm
Angle of inclination at each bend: 60°
Total conveyor length measured on the floor: 3,900 mm
Discharge height: 2,900 mm
Height of horizontal section: 500 mm
Design:
Aluminum construction
- Reinforced dual profile 90x45 mm
Drive drum + return drum made of S235 steel, welded and machined
D: 100x520 mm, crowned and precision-turned; shaft fixed with bearing units
Drive: Flange-mounted geared motor, 1.10 kW; belt speed: 0.53 m/sec
Connection: 230/400V, 50Hz, protection class IP54
Drive cabling pre-installed up to the motor terminal box (Commissioning must be carried out by a qualified electrician)
PU conveyor belt DM 20/2 0+007 PU, incl. PU wave edge (petrol matte)
Belt width: 500 mm
2 pcs. wave edges, 50 mm high, 25 mm wide, high frequency welded
36 pcs. PU T-40 cleats, 300 mm long, approx. 300 mm pitch
Belt material: 2-ply, extra cross-stable
At the angled section, the belt is guided by 3 hold-down rollers on each side.
The belt is manufactured with a 70 mm wide, edge-free zone on both sides.

Due to the wave edge on both sides, the usable width of the conveyor belt is reduced:
Usable width: 300 mm, determined as follows:
(Top view) Crosswise arrangement 70+25+5+300+5+25+70 mm
Belt guidance via a PVC wedge strip on the running surface, profile 10x6 mm
- Including recess in the discharge plate
- Including sliding guides in the drive and return drum

Price is net, plus 19% VAT.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.