Băng tảidie magnetprofis
Steigförderband
Băng tải
die magnetprofis
Steigförderband
Năm sản xuất
2026
Tình trạng
Mới
Vị trí
Ursberg 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Băng tải
- Nhà sản xuất:
- die magnetprofis
- Mô hình:
- Steigförderband
- Năm sản xuất:
- 2026
- Tình trạng:
- mới
Giá & Vị trí
- Vị trí:
- Oberrohrer Straße 8/10, 86513 Ursberg, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21189825
- Cập nhật:
- lần cuối vào ngày 08.02.2026
Mô tả
Aluminum incline conveyor with substructure
including leveling feet and machine feet for compensating uneven floors
- Feed height: 500 mm
- Inclined section: 2,000 mm
- Discharge height: 1,200 mm
Design:
Aluminum structural construction
- Triple-reinforced profile 135x45 mm
- Continuous removal plate 2.0 mm galvanized
Drive roller + return roller made from S235 steel, welded and machined
Ø150x620 mm crowned, shaft fixed with pillow block bearings.
Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive pre-wired up to the motor terminal box
(Commissioning must be carried out by qualified electrical personnel)
PVC conveyor belt DM 10/2 0+005 PVC green
Belt width: 600 mm
endless high-frequency welded with stepped joint
Belt material: 2-ply, especially cross-stable
2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge
Dodpfx Aaeyhzhbs Nokh
14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted
Belt material: 2-ply, especially cross-stable
Due to the wave profiles on both sides, the usable belt width is reduced:
Usable width 500 mm, calculated as follows:
(Top view) Crosswise arrangement 50+500+50 mm
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
including leveling feet and machine feet for compensating uneven floors
- Feed height: 500 mm
- Inclined section: 2,000 mm
- Discharge height: 1,200 mm
Design:
Aluminum structural construction
- Triple-reinforced profile 135x45 mm
- Continuous removal plate 2.0 mm galvanized
Drive roller + return roller made from S235 steel, welded and machined
Ø150x620 mm crowned, shaft fixed with pillow block bearings.
Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive pre-wired up to the motor terminal box
(Commissioning must be carried out by qualified electrical personnel)
PVC conveyor belt DM 10/2 0+005 PVC green
Belt width: 600 mm
endless high-frequency welded with stepped joint
Belt material: 2-ply, especially cross-stable
2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge
Dodpfx Aaeyhzhbs Nokh
14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted
Belt material: 2-ply, especially cross-stable
Due to the wave profiles on both sides, the usable belt width is reduced:
Usable width 500 mm, calculated as follows:
(Top view) Crosswise arrangement 50+500+50 mm
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2016
Gửi yêu cầu
Điện thoại & Fax
+49 8236 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Ursberg
9.423 km
Băng tải, băng tải phẳng, băng tải nâng
die magnetprofis GmbH & Co. KGSteigförderband Flachförderband Förderer
die magnetprofis GmbH & Co. KGSteigförderband Flachförderband Förderer
Quảng cáo nhỏ
Ursberg
9.423 km
Băng chuyền
die magnetprofisSteigförderband
die magnetprofisSteigförderband
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
















