Buồng môi trường có điều khiển độ ẩm, dung tích 1000 lítCTS Klimakammer
CS-70/1000-5 -70°C bis +180°C
Buồng môi trường có điều khiển độ ẩm, dung tích 1000 lít
CTS Klimakammer
CS-70/1000-5 -70°C bis +180°C
Tình trạng
Đã qua sử dụng
Vị trí
Borken 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Nhà sản xuất:
- CTS Klimakammer
- Mô hình:
- CS-70/1000-5 -70°C bis +180°C
- Tình trạng:
- rất tốt (đã qua sử dụng)
Giá & Vị trí
- Vị trí:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21604598
- Số tham chiếu:
- 25120
- Cập nhật:
- lần cuối vào ngày 27.03.2026
Mô tả
CTS Type: CS-70/1000-5
Water-cooled Condenser
For sale is a high-quality climate and temperature test chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5.
This unit is used to simulate a wide range of environmental conditions and is typically employed in industry, research, and quality assurance.
It enables precise testing under extreme temperature and humidity conditions, suitable for:
- Material testing
- Aging tests
- Electronics and component testing
- Climate and environmental simulation
Thanks to the large test chamber (1000 liters) and advanced control technology, both rapid temperature changes and steady long-term tests can be performed.
The system is water-cooled, ensuring stable and efficient operation.
Technical data:
Control:
- Multi-touch controller with integrated program generator
- Programmable test sequences
- Side cable port: 50 cm / 125 cm
Temperature range:
- Temperature: –70°C to +180°C
- Heating rate: approx. 6 K/min
- Cooling rate: approx. 5 K/min
- Temperature constancy: ± 0.3 K
Climatic data (humidity):
- Climate temperature range: +10°C to +95°C
- Humidity range: 10% to 98% rH
- Humidity stability:
- Range I: ± 1.5% rH
- Range II: ± 3% rH
- Dew point range:
- I: +7°C to +94°C
- II: –10°C to +7°C
Dimensions:
- Exterior (HxWxD): 1950 x 1270 x 2245 mm
- Interior (HxWxD): 900 x 1000 x 1100 mm
- Test chamber volume: 1000 liters
Electrical data:
- Connection: 400 V, 3/N, 50 Hz
- Tolerance: +6% / –10%
- Connected load: approx. 16.4 kW
Nodpfeyxmi Aex Ad Dokw
- Rated current: approx. 26.8 A
Refrigeration system:
- Refrigerant: R404A & R23
- Weight: approx. 900 kg
For your safety as a buyer, please note the following information!
The following points are carried out on our offered chambers in advance:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful testing, the chambers are subjected to a documented trial run.
Condition: used
Scope of supply: (see photo)
(Technical data and specifications subject to change and error!)
For further questions, you are welcome to contact us by phone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Water-cooled Condenser
For sale is a high-quality climate and temperature test chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5.
This unit is used to simulate a wide range of environmental conditions and is typically employed in industry, research, and quality assurance.
It enables precise testing under extreme temperature and humidity conditions, suitable for:
- Material testing
- Aging tests
- Electronics and component testing
- Climate and environmental simulation
Thanks to the large test chamber (1000 liters) and advanced control technology, both rapid temperature changes and steady long-term tests can be performed.
The system is water-cooled, ensuring stable and efficient operation.
Technical data:
Control:
- Multi-touch controller with integrated program generator
- Programmable test sequences
- Side cable port: 50 cm / 125 cm
Temperature range:
- Temperature: –70°C to +180°C
- Heating rate: approx. 6 K/min
- Cooling rate: approx. 5 K/min
- Temperature constancy: ± 0.3 K
Climatic data (humidity):
- Climate temperature range: +10°C to +95°C
- Humidity range: 10% to 98% rH
- Humidity stability:
- Range I: ± 1.5% rH
- Range II: ± 3% rH
- Dew point range:
- I: +7°C to +94°C
- II: –10°C to +7°C
Dimensions:
- Exterior (HxWxD): 1950 x 1270 x 2245 mm
- Interior (HxWxD): 900 x 1000 x 1100 mm
- Test chamber volume: 1000 liters
Electrical data:
- Connection: 400 V, 3/N, 50 Hz
- Tolerance: +6% / –10%
- Connected load: approx. 16.4 kW
Nodpfeyxmi Aex Ad Dokw
- Rated current: approx. 26.8 A
Refrigeration system:
- Refrigerant: R404A & R23
- Weight: approx. 900 kg
For your safety as a buyer, please note the following information!
The following points are carried out on our offered chambers in advance:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful testing, the chambers are subjected to a documented trial run.
Condition: used
Scope of supply: (see photo)
(Technical data and specifications subject to change and error!)
For further questions, you are welcome to contact us by phone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Gửi yêu cầu
Điện thoại & Fax
+49 2861 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi

















