Hệ thống oxy di độngCSF Engineering
CSF-PSA50
Hệ thống oxy di động
CSF Engineering
CSF-PSA50
EXW VB chưa bao gồm thuế GTGT
40.000 €
Năm sản xuất
2025
Tình trạng
Đã qua sử dụng
Vị trí
Hamburg 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Hệ thống oxy di động
- Nhà sản xuất:
- CSF Engineering
- Mô hình:
- CSF-PSA50
- Năm sản xuất:
- 2025
- Tình trạng:
- Bộ phận mang phụ tùng bị lỗi (đã qua sử dụng)
- Tính năng hoạt động:
- chưa kiểm tra
Giá & Vị trí
EXW VB chưa bao gồm thuế GTGT
40.000 €
- Vị trí:
- Hamburg, Đức

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20841757
- Số tham chiếu:
- GM/HH/255058/25/JHA
- Cập nhật:
- lần cuối vào ngày 30.12.2025
Mô tả
We are selling, on behalf and for the account of the interested party, the following damaged mobile oxygen filling plant for medical oxygen under the known terms and conditions of sale to the highest bidder.
The system offered for sale is a mobile filtration and filling plant for medical oxygen, built into a custom-made container matching the dimensions of a 40' High Cube container (Dimensions (L x W x H): 1,219 cm x 244 cm x 290 cm).
Hjdpfex Rbk Sjx Ac Dsg
CSF-PSA50
"Containerized 50m³/h PSA oxygen plant with 36m³/h cylinder filling unit and filling ramp, purity 93 +/- 3%, including spare parts for two years."
The container has structural damage at the rear (door area) roof crossmember: the crossmember shows signs of paint and material abrasion, is severely deformed and bent forward. The weld seam to the right upper corner casting is torn, etc. See images. The door frame is warped. The right side wall is significantly crushed near the door area. The left side wall has a dent in the lower area about 2 m from the doors. The bolted joints of the side walls have been ripped out, leaving holes. Inside the container, the cladding on the container roof and the right side wall is deformed and partially torn off. On one air conditioning unit, the front cover has come loose and is hanging down by a cable. A side panel from a piece of equipment has come out of its frame, fallen, and caused paint abrasions on two components. For the internal plant components (see downloadable PDF list), it cannot be confirmed whether they were damaged as a result of the collision (at approximately 5 km/h).
Difficulty: The container is still located on the premises of UNIKAI Lagerei- und Speditionsgesellschaft mbH, 20457 Hamburg, on a MAFI trailer. According to UNIKAI, it is possible to load the container using suitable lifting gear via the lower pick-up points. Transport should present no issue, as the lower corner castings required for securing during transport are undamaged.
Sales basis: "as is where is" - "ex Hamburg warehouse."
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
The system offered for sale is a mobile filtration and filling plant for medical oxygen, built into a custom-made container matching the dimensions of a 40' High Cube container (Dimensions (L x W x H): 1,219 cm x 244 cm x 290 cm).
Hjdpfex Rbk Sjx Ac Dsg
CSF-PSA50
"Containerized 50m³/h PSA oxygen plant with 36m³/h cylinder filling unit and filling ramp, purity 93 +/- 3%, including spare parts for two years."
The container has structural damage at the rear (door area) roof crossmember: the crossmember shows signs of paint and material abrasion, is severely deformed and bent forward. The weld seam to the right upper corner casting is torn, etc. See images. The door frame is warped. The right side wall is significantly crushed near the door area. The left side wall has a dent in the lower area about 2 m from the doors. The bolted joints of the side walls have been ripped out, leaving holes. Inside the container, the cladding on the container roof and the right side wall is deformed and partially torn off. On one air conditioning unit, the front cover has come loose and is hanging down by a cable. A side panel from a piece of equipment has come out of its frame, fallen, and caused paint abrasions on two components. For the internal plant components (see downloadable PDF list), it cannot be confirmed whether they were damaged as a result of the collision (at approximately 5 km/h).
Difficulty: The container is still located on the premises of UNIKAI Lagerei- und Speditionsgesellschaft mbH, 20457 Hamburg, on a MAFI trailer. According to UNIKAI, it is possible to load the container using suitable lifting gear via the lower pick-up points. Transport should present no issue, as the lower corner castings required for securing during transport are undamaged.
Sales basis: "as is where is" - "ex Hamburg warehouse."
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2017
Gửi yêu cầu
Điện thoại & Fax
+49 421 3... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi














































