Máy nén khí trục vít có máy sấy và bình chứa 270 lítCORMAK
LUFT 700 VSD+PM COMPACT/ 270l tank
Máy nén khí trục vít có máy sấy và bình chứa 270 lít
CORMAK
LUFT 700 VSD+PM COMPACT/ 270l tank
giá cố định chưa bao gồm thuế GTGT
3.270 €
Năm sản xuất
2026
Tình trạng
Mới
Vị trí
Siedlce 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
3.270 €
- Vị trí:
- Brzeska 120, 08-110 Siedlce, Polska

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21043037
- Cập nhật:
- lần cuối vào ngày 22.01.2026
Mô tả
CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER
SET INCLUDES:
LUFT 700 VSD+PM COMPACT screw compressor with dryer
Horizontal compressed air tank – 270 L
Key Features of the Energy Saver Series
1. Permanent Magnet (PM) Motor Technology
Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they:
Achieve efficiency levels of IE4 or even IE5
Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range)
Are smaller, lighter, and generate less heat
2. Advanced VSD Inverter Control
Kwodpfx Afeycg I Sohet
The heart of the Energy Saver line is the frequency inverter (VSD).
Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy.
Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which:
Saves the electrical installation in the facility
Allows frequent start/stop cycles without overheating the windings
4. Real Energy Savings
In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors.
Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters.
Longer service life: No sudden pressure and temperature spikes prolong the screw stage life.
Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V / 50Hz
Air delivery at 0–6 bar: avg. 690 L/min
Air delivery at 6 bar: 690 L/min
Air delivery at 8 bar: 650 L/min
Air delivery at 10 bar: 650 L/min
Outlet connection (G): 1/2"
Dimensions: 1495 × 520 × 1340 mm
Weight: 250 kg
SET INCLUDES:
LUFT 700 VSD+PM COMPACT screw compressor with dryer
Horizontal compressed air tank – 270 L
Key Features of the Energy Saver Series
1. Permanent Magnet (PM) Motor Technology
Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they:
Achieve efficiency levels of IE4 or even IE5
Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range)
Are smaller, lighter, and generate less heat
2. Advanced VSD Inverter Control
Kwodpfx Afeycg I Sohet
The heart of the Energy Saver line is the frequency inverter (VSD).
Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy.
Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which:
Saves the electrical installation in the facility
Allows frequent start/stop cycles without overheating the windings
4. Real Energy Savings
In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors.
Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters.
Longer service life: No sudden pressure and temperature spikes prolong the screw stage life.
Technical Specifications
Motor power: 5.5 kW / 7.5 HP
Voltage: 400V / 50Hz
Air delivery at 0–6 bar: avg. 690 L/min
Air delivery at 6 bar: 690 L/min
Air delivery at 8 bar: 650 L/min
Air delivery at 10 bar: 650 L/min
Outlet connection (G): 1/2"
Dimensions: 1495 × 520 × 1340 mm
Weight: 250 kg
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+48 25 63... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi












