Robot công nghiệpCloos
2 Qirox Roboter auf Bodenfahrbahn
Robot công nghiệp
Cloos
2 Qirox Roboter auf Bodenfahrbahn
Năm sản xuất
2019
Tình trạng
Đã qua sử dụng
Vị trí
Đức 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Robot công nghiệp
- Nhà sản xuất:
- Cloos
- Năm sản xuất:
- 2019
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Oberpfalz, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A19042101
- Cập nhật:
- lần cuối vào ngày 06.05.2025
Mô tả
System consisting of:
1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive
Software expansion for each robot:
Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 single-wire tandem welding equipment with automatic torch change system:
2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning
Cgjdpfx Aewgd Hzoayep
Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2
2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m,
1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm
Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status.
Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator.
1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct
Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive
Software expansion for each robot:
Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 single-wire tandem welding equipment with automatic torch change system:
2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning
Cgjdpfx Aewgd Hzoayep
Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2
2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m,
1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm
Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status.
Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator.
1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct
Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Gửi yêu cầu
Điện thoại & Fax
+43 2236 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Hessisch Lichtenau
9.387 km
Hệ thống cắt ngọn lửa CNC, máy cắt ngọn lửa, máy cắt ngọn lửa
BACHACW 2500
BACHACW 2500
Quảng cáo nhỏ
Mierlo
9.652 km
Máy uốn ống
Herber150RL
Herber150RL
Quảng cáo nhỏ
Gondelsheim
9.525 km
Cần cẩu bầu trời cần cẩu cần cẩu trong nhà cần cẩu đường băng
Demag Portalkran KBK 250KGKBKI/II KBK1/2 8x4m 250Kg DC Kettenzug
Demag Portalkran KBK 250KGKBKI/II KBK1/2 8x4m 250Kg DC Kettenzug
Quảng cáo nhỏ
Jelah
8.949 km
NHẤN PHANH
BAYKALAPH 3100/10
BAYKALAPH 3100/10
Quảng cáo nhỏ
Luckenwalde
9.133 km
Từng bước hệ thống sơn ướt
PROTONSTP-STP
PROTONSTP-STP
Quảng cáo nhỏ
Hergensweiler
9.491 km
Hàn Máy khoan bàn, điều chỉnh chiều cao
ProtecKT 3000 HV
ProtecKT 3000 HV
Quảng cáo nhỏ
Wittenberge
9.201 km
BÁO CHÍ PHANH
WeinbrennerGP250 4050
WeinbrennerGP250 4050
Quảng cáo nhỏ
Fevziçakmak
7.820 km
Máy mài kim loại tấm
TFONSurfacer® RRBC (Tailored Machines)
TFONSurfacer® RRBC (Tailored Machines)
Quảng cáo nhỏ
Vaterstetten
9.330 km
Máy ép phun
KraussMaffei Technologies GmbHKM 160 / 750 PA G01
KraussMaffei Technologies GmbHKM 160 / 750 PA G01
Quảng cáo nhỏ
Würzburg
9.410 km
Giá đỡ pallet Giá đỡ hạng nặng Speedlock P90 H
Dexion
Dexion
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi











































































































