Bảng kiểm traChroma Batteriepack-Tester
ATE 17020
Bảng kiểm tra
Chroma Batteriepack-Tester
ATE 17020
giá cố định chưa bao gồm thuế GTGT
35.000 €
Tình trạng
Đã qua sử dụng
Vị trí
Borken 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Bảng kiểm tra
- Nhà sản xuất:
- Chroma Batteriepack-Tester
- Mô hình:
- ATE 17020
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
35.000 €
- Vị trí:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A19479136
- Số tham chiếu:
- 24588
- Cập nhật:
- lần cuối vào ngày 17.11.2025
Mô tả
Chroma
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Iijdpfx Aowwrxash Hoi
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Iijdpfx Aowwrxash Hoi
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2012
Gửi yêu cầu
Điện thoại & Fax
+49 2861 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi









