Thiết bị điều khiển nhiệt độ 6 kênh Autotherm AWF 130-27/VK/6KAutotherm
Temperaturregelgerät AWF 130-27/VK/6K
Thiết bị điều khiển nhiệt độ 6 kênh Autotherm AWF 130-27/VK/6K
Autotherm
Temperaturregelgerät AWF 130-27/VK/6K
VB chưa bao gồm thuế GTGT
80.000 €
Tình trạng
Đã qua sử dụng
Vị trí
Borken 

Dữ liệu cơ bản
- Nhà sản xuất:
- Autotherm
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
VB chưa bao gồm thuế GTGT
80.000 €
- Vị trí:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A22147572
- Số tham chiếu:
- 23415
- Cập nhật:
- lần cuối vào ngày 15.10.2026
Mô tả
Autotherm
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
According to the enclosed technical brief:
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Guedpfx Aijzd Rtyj Djh
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
According to the enclosed technical brief:
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Guedpfx Aijzd Rtyj Djh
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Gửi yêu cầu
Điện thoại & Fax
+49 2861 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi

















