Kệ hạng nặng
4 Stück Kragarmregal-Ständer einseitig Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m

VB chưa bao gồm thuế GTGT

1.490 €

Năm sản xuất

2024

Tình trạng

máy trưng bày

Vị trí

Bad Feilnbach Đức

Kệ hạng nặng 4 Stück Kragarmregal-Ständer einseitig Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m

4 Stück Kragarmregal-Ständer einseitig Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m

Hiển thị bản đồ

Thông tin về máy móc

Tên máy:: Kệ hạng nặng

Nhà sản xuất:: 4 Stück Kragarmregal-Ständer einseitig

Mô hình:: Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m

Năm sản xuất:: 2024

Tình trạng:: gần như mới (máy trưng bày)

Giá & Vị trí

VB chưa bao gồm thuế GTGT

1.490 €

Vị trí:: Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

Gọi điện

Chi tiết về đề nghị

ID tin đăng:: A5776089

Cập nhật:: lần cuối vào ngày 28.01.2025

Mô tả

Cantilever rack in painted version (RAL 7016 anthracite):

Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)

Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge

Detailed description:
Gsdpoguk A Hsfx Agqjil
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard

- Made in Germany
- Short delivery time
- On-site collection possible

Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.

The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.

The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.