Máy thử nghiệm vật liệu đa năng để bàn

ZwickRoell BT2-FA005TN.A50.002 AllroundLine

Material Testing Machine / Universal Testing Machine
Type: BT2-FA005TN.A50.002
Article No. Base Machine: 1004473
Z005 TN AllroundLine Table-Top

The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine.
The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems.
In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale,
as well as extensive product-specific accessories.
Technical data:
Testing machine:
Maximum testing force of the load frame: 5 kN
Total testing space height: 1,164 mm
Testing space height at the bottom without attachments: 1,030 mm
Testing space height at the top without attachments: 1,015 mm
Testing space width: 440 mm
Crosshead speed: 0.0005 to 3,000 mm/min
Return speed: max. 3,000 mm/min
Deviation of the drive speed: max. 0.05 %
Drive stroke resolution: 0.959431 nm
Positioning repeatability: ±2 µm
Control: adaptive
Control cycle: 1,000 Hz
Load cell:
Type: Xforce HP
Rated force: 0.5 kN / 500 N
Suitable for static and dynamic tensile and compressive forces
Accuracy class 1 from 1 N
Accuracy class 0.5 from 5 N
Maximum operating force: 150 % of the rated force
Limit force: 150 % of the rated force
Breaking force: 300 % of the rated force
Protection class: IP54
Connection thread: M28 × 1.5
Connection pin: Ø 20 mm
Measuring and control electronics:
ZwickRoell testControl II machine electronics
DCSC measuring module for strain gauge load cells
Measured value acquisition rate: 400 kHz
Measured value transmission to PC: 500 Hz
Automatic zero point correction
Measured signal time correction
Ethernet interface to PC
Measuring amplifier for strain gauge full bridges
Measuring range: 0.2 to 165 % of the rated measured value
Measured value acquisition rate of the DCSC module: max. 10 kHz
Force measurement technology according to ISO 7500-1 and ASTM E4
Testing device for automotive injectors:
Article No.: 3002956
Maximum testing force: 200 N
Dimensions: approx. 396 × 235 × 309 mm
Weight: approx. 20 kg
Pneumatic sample holders:
Article No.: 3001461
Maximum testing force: 200 N
Maximum opening width: 40 mm
Closes on both sides and symmetrically
Nsdpfx Aszwvu Nofkswk
Interchangeable clamping jaws
Dimensions of the load frame:
Height without base profiles: 1,314 mm
Height with base profiles: 1,528 to 2,108 mm
Width without base profiles: 680 mm
Width with base profiles: 856 mm
Width including machine electronics: 1,044 mm
Depth with base profiles: 650 mm
Depth including machine electronics: 690 mm
Weight:
Load frame with machine electronics: approx. 161 kg
Base profiles: approx. 31 kg
Machine with typical attachments: approx. 226 kg

+
Laser measuring system / visual color recognition system from Keyence

+
Precision scale:
Article No.: 085770
Maximum load: 220 g
Readability: 0.1 mg
Repeatability at 200 g: 0.1 mg
Linearity: 0.25 mg
RS232 interface for data transmission
Separate weighing cell, display unit and operating terminal

+

PC with ZwickRoell testXpert III testing software, version 1.2

+

Microphone and many other accessories shown in the pictures

Condition: used

Optical condition according to the pictures
Functional scope according to the pictures

The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves.
Shipping or freight shipping is possible.
Subject to changes, errors and prior sale.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.