Máy kiểm tra vật liệu để bànZwick / Roell
Z020 Allround-Line BT1-FR020TN.A50
Máy kiểm tra vật liệu để bàn
Zwick / Roell
Z020 Allround-Line BT1-FR020TN.A50
giá cố định chưa bao gồm thuế GTGT
27.500 €
Tình trạng
Đã qua sử dụng
Vị trí
Borken 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
27.500 €
- Vị trí:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20951877
- Số tham chiếu:
- 24974
- Cập nhật:
- lần cuối vào ngày 15.01.2026
Mô tả
Zwick / Roell
Type: Z020 Allround-Line BT1-FR020TN.A50
Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III
For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components.
The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education.
Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included).
Technical Data:
Rated test force: 20 kN
Hjdsx Up Igjpfx Aazefb
Test direction: tensile & compression
Power supply: 230 V / 50–60 Hz / single-phase
Power consumption: approx. 2.1 kVA
Weight: approx. 150–180 kg
Dimensions: approx. 856 × 650 × 1,545–2,114 mm
Technical data (according to documentation & nameplate)
Mechanics / Testing
Nominal force: 20 kN
Testing direction: tensile & compression
Max. test frequency: 0.5 Hz
Crosshead: servo-electric
Positioning accuracy: < 1 µm
Speed range: 0.0005 – 1,000 mm/min
Dimensions & Weight:
Total height: approx. 1,545 – 2,114 mm (depending on crosshead position)
Total width: approx. 856 mm
Total depth: approx. 650 mm
Working area width: 440 mm
Weight:
approx. 150 kg (base unit)
approx. 180 kg with typical configuration
Electrical Data
Power supply: 230 V AC
Phases: single-phase (1PH, N, PE)
Mains frequency: 50 / 60 Hz
Current consumption: approx. 8–10 A
Power consumption: approx. 2.1 kVA
Plug: Schuko (CEE 7)
Measuring & Control Electronics:
Internal data acquisition: 500 Hz
Data transmission to PC: adjustable 10–100 Hz
Interface: RS232 (COM)
Electronics housing protection class: IP32
Important note:
'The table shown in the photos is not included in the sale.'
Condition: used
Scope of delivery: (see picture)
- Zwick / Roell materials testing machine (20 kN)
- Electronics unit
- PC workstation (monitor, PC – please see photos for condition)
- 2 measurement modules (Delock units)
- Zwick/Roell testXpert III software (data carrier)
- Original operating and technical documentation
- Various connection and interface cables
(Specifications are subject to change and errors excepted!)
If you have any questions, we will be pleased to assist you by phone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Type: Z020 Allround-Line BT1-FR020TN.A50
Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III
For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components.
The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education.
Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included).
Technical Data:
Rated test force: 20 kN
Hjdsx Up Igjpfx Aazefb
Test direction: tensile & compression
Power supply: 230 V / 50–60 Hz / single-phase
Power consumption: approx. 2.1 kVA
Weight: approx. 150–180 kg
Dimensions: approx. 856 × 650 × 1,545–2,114 mm
Technical data (according to documentation & nameplate)
Mechanics / Testing
Nominal force: 20 kN
Testing direction: tensile & compression
Max. test frequency: 0.5 Hz
Crosshead: servo-electric
Positioning accuracy: < 1 µm
Speed range: 0.0005 – 1,000 mm/min
Dimensions & Weight:
Total height: approx. 1,545 – 2,114 mm (depending on crosshead position)
Total width: approx. 856 mm
Total depth: approx. 650 mm
Working area width: 440 mm
Weight:
approx. 150 kg (base unit)
approx. 180 kg with typical configuration
Electrical Data
Power supply: 230 V AC
Phases: single-phase (1PH, N, PE)
Mains frequency: 50 / 60 Hz
Current consumption: approx. 8–10 A
Power consumption: approx. 2.1 kVA
Plug: Schuko (CEE 7)
Measuring & Control Electronics:
Internal data acquisition: 500 Hz
Data transmission to PC: adjustable 10–100 Hz
Interface: RS232 (COM)
Electronics housing protection class: IP32
Important note:
'The table shown in the photos is not included in the sale.'
Condition: used
Scope of delivery: (see picture)
- Zwick / Roell materials testing machine (20 kN)
- Electronics unit
- PC workstation (monitor, PC – please see photos for condition)
- 2 measurement modules (Delock units)
- Zwick/Roell testXpert III software (data carrier)
- Original operating and technical documentation
- Various connection and interface cables
(Specifications are subject to change and errors excepted!)
If you have any questions, we will be pleased to assist you by phone.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Gửi yêu cầu
Điện thoại & Fax
+49 2861 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi





















