Máy cắt vảiTrotec inkl. JQS Querimat, Sigama C-13
SP 4000, Vent Set SP 3000, Querimat QSV
Máy cắt vải
Trotec inkl. JQS Querimat, Sigama C-13
SP 4000, Vent Set SP 3000, Querimat QSV
Giá cố định chưa bao gồm thuế GTGT
110.000 €
Năm sản xuất
2019
Tình trạng
Đã qua sử dụng
(chưa kiểm tra)
Vị trí
Worms 

Thông tin về máy móc
- Tên máy:
- Máy cắt vải
- Nhà sản xuất:
- Trotec inkl. JQS Querimat, Sigama C-13
- Số máy:
- S40-0051
- Năm sản xuất:
- 2019
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- chưa kiểm tra
Giá & Vị trí
Giá cố định chưa bao gồm thuế GTGT
110.000 €
- Vị trí:
- Worms, Deutschland

Gọi điện
Chi tiết kỹ thuật
- Loại dòng điện đầu vào:
- ba pha
- Điện áp đầu vào:
- 400 V
- Chiều rộng làm việc:
- 3.210 mm
- Chiều rộng cắt (tối đa):
- 3.210 mm
- Công suất laser:
- 400 W
- Loại làm mát:
- nước
- Loại laser:
- Laser CO₂
- Mẫu nguồn laser:
- Firestar f400
- Thiết bị:
- hút khói
Chi tiết về đề nghị
- ID tin đăng:
- A22565052
- Cập nhật:
- lần cuối vào ngày 17.08.2026
Mô tả
The system consists of:
Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system
Sigma C13 – Cooling unit for the laser system
Aigner VENT Set SP 3000 – Extraction and ventilation unit
ASCO BV – Unwinding and material feed system for roll goods
JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm
Firestar – CO₂ laser source
Iodpfx Alezuyg Rotoba
The system is currently located in Worms and was used in ongoing production until the plant was shut down.
Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement.
The system is offered in its current condition and with the components shown in the pictures.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system
Sigma C13 – Cooling unit for the laser system
Aigner VENT Set SP 3000 – Extraction and ventilation unit
ASCO BV – Unwinding and material feed system for roll goods
JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm
Firestar – CO₂ laser source
Iodpfx Alezuyg Rotoba
The system is currently located in Worms and was used in ongoing production until the plant was shut down.
Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement.
The system is offered in its current condition and with the components shown in the pictures.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2026
2 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 1523 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi






















