Máy xây dựngSeppi
M. BMS-F 125 Forstmulcher 10-20to lagernd
Máy xây dựng
Seppi
M. BMS-F 125 Forstmulcher 10-20to lagernd
giá cố định chưa bao gồm thuế GTGT
22.390 €
Tình trạng
Đã qua sử dụng
Vị trí
Burghaun 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
22.390 €
- Vị trí:
- Burghaun, Đức

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21117132
- Số tham chiếu:
- bmsf125-2
- Cập nhật:
- lần cuối vào ngày 29.01.2026
Mô tả
Seppi M. BMS-F 125 Forestry Mulcher / NEW / in stock & immediately available
Price: €22,390.00 net / €26,644.10 gross
Working width: 125 cm
Overall width: 153 cm
Depth: 105 cm
Height: 72 cm
Weight: 667 kg
- Mulching attachment for excavators, suitable for mulching along riverbanks, in forests, along railway lines, and in other hard-to-access locations
- Mulches brushwood and timber up to 20 cm in diameter
- For excavators from 10-20 tons
- Suitable for mounting on various adapter plates
- Drive designed for hydraulic motor, depending on the carrier's flow rate
- Indirect belt drive with 5 V-belts
- Reinforced housing made from wear-resistant AR 400 steel
- Drop-forged counter-blades
- Hydraulically adjustable hood
- Continuous hinge along the entire length of the hood
- Front protection with chains
- Rear protection with chains
- Height-adjustable skid shoes, reinforced with a carbide plate
- Colour: red RAL3020 · anthracite RAL7021
OPT 513 CUT CONTROL
- Depth limiter for rotor with fixed tools
OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts)
- 27 pcs, spare part no. 176.02.005
OPT 465 M-BOOST angled-axis piston motor
- With automatic displacement control 60-80 cm³ and overpressure valve
- Displacement in cm³ (min-max): 60-80
- Required pressure in bar (min-max): 200-350
- Required hydraulic flow rate: 100-150 l/min
Intermediate adapter for BE314 Z1
- Approx. 200 mm high
Ppjdpfx Absyfrhpjgjl
An independent hydraulic system is recommended for operation.
Three hydraulic lines are required for the rotor: feed, return and case drain.
The unit is supplied without hoses, couplings and adapter plate.
We have many adapter plates (MS01/MS03/MS08/CW05/CW10/CW20/OQ65/OQ70/55/etc...) in stock and immediately available.
Our warehouse holds a wide selection of various Seppi M. products, all ready for immediate delivery!
Mr. Herden (phone) will be happy to assist you.
We are also happy to provide you with a financing offer on request.
We are official distributor and service partner for:
- Magni telescopic handlers
- Gierking GMT
- OilQuick
- Weber MT
- Holp
- DMS
- Seppi M.
- Westtech
- JCB construction machinery
- Mercedes-Benz
- Iveco
With around 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany.
We supply the complete Seppi M. product range!
Errors and prior sale excepted!
Rental possible
= Further Information =
New: Yes
Please contact Tobias Ebert for further information.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Price: €22,390.00 net / €26,644.10 gross
Working width: 125 cm
Overall width: 153 cm
Depth: 105 cm
Height: 72 cm
Weight: 667 kg
- Mulching attachment for excavators, suitable for mulching along riverbanks, in forests, along railway lines, and in other hard-to-access locations
- Mulches brushwood and timber up to 20 cm in diameter
- For excavators from 10-20 tons
- Suitable for mounting on various adapter plates
- Drive designed for hydraulic motor, depending on the carrier's flow rate
- Indirect belt drive with 5 V-belts
- Reinforced housing made from wear-resistant AR 400 steel
- Drop-forged counter-blades
- Hydraulically adjustable hood
- Continuous hinge along the entire length of the hood
- Front protection with chains
- Rear protection with chains
- Height-adjustable skid shoes, reinforced with a carbide plate
- Colour: red RAL3020 · anthracite RAL7021
OPT 513 CUT CONTROL
- Depth limiter for rotor with fixed tools
OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts)
- 27 pcs, spare part no. 176.02.005
OPT 465 M-BOOST angled-axis piston motor
- With automatic displacement control 60-80 cm³ and overpressure valve
- Displacement in cm³ (min-max): 60-80
- Required pressure in bar (min-max): 200-350
- Required hydraulic flow rate: 100-150 l/min
Intermediate adapter for BE314 Z1
- Approx. 200 mm high
Ppjdpfx Absyfrhpjgjl
An independent hydraulic system is recommended for operation.
Three hydraulic lines are required for the rotor: feed, return and case drain.
The unit is supplied without hoses, couplings and adapter plate.
We have many adapter plates (MS01/MS03/MS08/CW05/CW10/CW20/OQ65/OQ70/55/etc...) in stock and immediately available.
Our warehouse holds a wide selection of various Seppi M. products, all ready for immediate delivery!
Mr. Herden (phone) will be happy to assist you.
We are also happy to provide you with a financing offer on request.
We are official distributor and service partner for:
- Magni telescopic handlers
- Gierking GMT
- OilQuick
- Weber MT
- Holp
- DMS
- Seppi M.
- Westtech
- JCB construction machinery
- Mercedes-Benz
- Iveco
With around 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany.
We supply the complete Seppi M. product range!
Errors and prior sale excepted!
Rental possible
= Further Information =
New: Yes
Please contact Tobias Ebert for further information.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2007
Gửi yêu cầu
Điện thoại & Fax
+49 6652 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi




















