Máy sấy, tủ sấy, tủ sấy công nghiệpROMER
Piec do suszenia,suszarka
Máy sấy, tủ sấy, tủ sấy công nghiệp
ROMER
Piec do suszenia,suszarka
VB chưa bao gồm thuế GTGT
6.500 €
Năm sản xuất
2020
Tình trạng
Mới
Vị trí
Skarżysko-Kamienna 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
VB chưa bao gồm thuế GTGT
6.500 €
- Vị trí:
- ul. Rejowska 99, 26-110 Skarżysko-Kamienna, Polska

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A4914993
- Cập nhật:
- lần cuối vào ngày 17.05.2024
Mô tả
7 "Touch Panel
The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it.
Memory of 20 programs with 10 events
It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve.
This is especially needed for more demanding processes.
Information on gas / oil consumption
The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters
Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive.
The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back.
Rodpfx Aefz U Hvec Eon
Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney
The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber.
It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures.
Minute forecast until the end
The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take.
To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back.
In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber.
Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique.
Each normal oven has only one heating zone and only one temperature measurement!
The multi zone heat system supports up to 8 independent heating zones in one oven.
Each heating zone has as many as 3 temperature sensors!
When there are temperature differences between zones, they are automatically equalized!
The system helps to combat the problem when elements of different material thicknesses enter the furnace.
The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it.
Memory of 20 programs with 10 events
It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve.
This is especially needed for more demanding processes.
Information on gas / oil consumption
The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters
Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive.
The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back.
Rodpfx Aefz U Hvec Eon
Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney
The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber.
It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures.
Minute forecast until the end
The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take.
To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back.
In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber.
Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique.
Each normal oven has only one heating zone and only one temperature measurement!
The multi zone heat system supports up to 8 independent heating zones in one oven.
Each heating zone has as many as 3 temperature sensors!
When there are temperature differences between zones, they are automatically equalized!
The system helps to combat the problem when elements of different material thicknesses enter the furnace.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2020
Gửi yêu cầu
Điện thoại & Fax
+48 41 23... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Mala Vranjska
8.811 km
Máy cắt
TreifDivider Type 2550
TreifDivider Type 2550
Quảng cáo nhỏ
Worthing
10.068 km
Flow Wrapper
RecordJaguar MD NG
RecordJaguar MD NG
Quảng cáo nhỏ
Kreuzau
9.615 km
Cơ sở xử lý
FrymaMZM / VK 50
FrymaMZM / VK 50
Quảng cáo nhỏ
Urk
9.609 km
MÁY CLIP TỰ ĐỘNG POLY CLIP FCA3462
Poly ClipFCA3462
Poly ClipFCA3462
Quảng cáo nhỏ
Bad Lippspringe
9.431 km
LÒ NƯỚNG GRILLOMAX
GRILLOMAX GRILLSTATIONGRILLSTATION
GRILLOMAX GRILLSTATIONGRILLSTATION
Quảng cáo nhỏ
Navan
10.320 km
Máy ly tâm Decanter tốc độ cao
GEAWestfalia Decanter Centrifuge
GEAWestfalia Decanter Centrifuge
Quảng cáo nhỏ
Urk
9.609 km
Nồi chiên dầu truyền nhiệt Gea CFS BR 3500 /600
Gea CFS KoppensBR 3500 /600
Gea CFS KoppensBR 3500 /600
Quảng cáo nhỏ
Wuppertal
9.564 km
Tạo hạt dưới nước
BKG NordsonA 300 - TVE1000 ED
BKG NordsonA 300 - TVE1000 ED
Quảng cáo nhỏ
Großrudestedt
9.297 km
Máy laser, máy cắt laser
MAZAKNTX48
MAZAKNTX48
Quảng cáo nhỏ
Skopje
8.719 km
LÒ PHỦ BỘT TĨNH ĐIỆN
HAS KİM İNŞAAT VE MAKİNE KİMYEVİ MADDE SElectrostatic Powder Coating Oven
HAS KİM İNŞAAT VE MAKİNE KİMYEVİ MADDE SElectrostatic Powder Coating Oven
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi




















































































