Máy sưởi khí gas Reznor UDSA015-4, máy sưởi không khí nóng cho nhà xưởng, công suất 14,59 kW

Reznor UDSA015-4

Reznor UDSA Gas-Fired Warm Air Heater

UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads.

The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard.

The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent.

UDSA: compact, revolutionary, and innovative.
With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters.

REZNOR UDSA
Gas-fired warm air heater. The advantages:

Efficiency of over 92%
The unit is also suitable for vertical mounting
Low NOx emissions
Innovative combustion concept
Quiet operation
With CE system certification, version B or C
Compact design for easy installation
Uniform heat distribution
Standard vertical and horizontal air deflection vanes
Modulation of the heating output up to 50%
EC technology
ErP Ready

These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners.
The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company.

These gas-fired warm air heaters are suitable for:
- Natural gas or LPG operation
- Recirculation operation
- Intake temperatures below 5°C with stainless steel heat exchanger *
Dksdpfx Ajx Ihiiedqeu
- Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch
- Ventilation* control via ECOtronic TN - L* with day/night/week program
- Exhaust gas extraction via roof, version B or C *
- Exhaust gas extraction through the outer wall, version C *

Gas-fired warm air heater type: UDSA015-4
Gas appliance type: B22P-C12-C32-C52-C62
Intended use: DE
Gas category: I2ELL
Gas type: G20 Natural gas
Connection pressure: 20 mbar
Nozzle pressure: 7.80 mbar
Max. rated heat input (Hs) QN: 17.60 kW
Max. rated heat input (Hi) QN: 15.86 kW
Max. rated heat output: 14.59 kW
Min. rated heat output:
Connection voltage: 230V 1N, 50Hz
Air flow rate: 1360 m3/h
Protection class: IP20

You can find more items – new and used – in our shop!
International shipping costs on request!

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.