Máy phủ đấtMcConnel
Robocut T500
Máy phủ đất
McConnel
Robocut T500
Năm sản xuất
2025
Tình trạng
Mới
Vị trí
Echt 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Máy phủ đất
- Nhà sản xuất:
- McConnel
- Mô hình:
- Robocut T500
- Năm sản xuất:
- 2025
- Tình trạng:
- mới
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Galvaniweg 10, 6101 XH Echt, Nederland

Gọi điện
Chi tiết kỹ thuật
- Tốc độ tối đa:
- 7 km/h
- Màu sắc:
- vàng
- Trọng lượng tổng cộng:
- 1.500 kg
- Thiết bị:
- chiếu sáng, máy tính trên xe
Chi tiết về đề nghị
- ID tin đăng:
- A17711568
- Cập nhật:
- lần cuối vào ngày 06.01.2026
Mô tả
McCONNEL ROBOCUT T500
DEMONSTRATION UNIT
- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.
Lhjdpju Ruruofx Afheb
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
DEMONSTRATION UNIT
- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.
Lhjdpju Ruruofx Afheb
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2020
Gửi yêu cầu
Điện thoại & Fax
+31 475 2... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Groenlo
9.566 km
Xe tải gắn nền tảng trên không
TeupenEURO B16T As-Is, Driving Licence B/3, Diesel, 16m
TeupenEURO B16T As-Is, Driving Licence B/3, Diesel, 16m
Quảng cáo nhỏ
Hagelstadt
9.279 km
Khác
Reformwerke WelsReform Muli T10X Hybridshift
Reformwerke WelsReform Muli T10X Hybridshift
Quảng cáo nhỏ
Böblingen
9.513 km
Máy cưa vòng đá
ELMAGSTBS-500
ELMAGSTBS-500
Quảng cáo nhỏ
Hennef
9.562 km
Bánh xe tải
LiebherrL 508 Radlader mit Schafel und Gabeln
LiebherrL 508 Radlader mit Schafel und Gabeln
Quảng cáo nhỏ
Neukamperfehn
9.463 km
Kệ giàn giàn giá pallet
Stow NS/ 2.700 mm/ K: 130 x 50 mm/Fachlast: 3.000 Kg
Stow NS/ 2.700 mm/ K: 130 x 50 mm/Fachlast: 3.000 Kg
Quảng cáo nhỏ
Apeldoorn
9.600 km
Thanh trượt
CaterpillarGrader Cobra 2700 HD Aanbouwgrader voor Schrank...
CaterpillarGrader Cobra 2700 HD Aanbouwgrader voor Schrank...
Quảng cáo nhỏ
Falkenberg
9.253 km
Máy xúc bánh lốp, máy xúc sân, máy xúc
H&RRadlader 3514
H&RRadlader 3514
Quảng cáo nhỏ
Halberstadt
9.279 km
Trung tâm tiện và phay CNC - 5 trục
DMGDMC 210 FD
DMGDMC 210 FD
Quảng cáo nhỏ
Aitrang
9.428 km
Con ngựa cưa nhỏ tuổi
Haf PräzisionstechnikJunior Sägebock
Haf PräzisionstechnikJunior Sägebock
Quảng cáo nhỏ
Othmarsingen
9.609 km
Máy xúc bánh xích
YANMARVio 40V 3x Schaufeln
YANMARVio 40V 3x Schaufeln
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
































































































































