Vòng đệmKitzinger
Spiracon 100
Vòng đệm
Kitzinger
Spiracon 100
Năm sản xuất
2024
Tình trạng
Mới
(hoạt động hoàn toàn)
Vị trí
Neuenkirchen 

Thông tin về máy móc
- Tên máy:
- Vòng đệm
- Nhà sản xuất:
- Kitzinger
- Mô hình:
- Spiracon 100
- Năm sản xuất:
- 2024
- Tình trạng:
- mới
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Neuenkirchen, Đức

Chi tiết kỹ thuật
- Tổng chiều dài:
- 2.900 mm
- Tổng chiều rộng:
- 620 mm
- Tổng chiều cao:
- 1.500 mm
Chi tiết về đề nghị
- ID tin đăng:
- A22044208
- Cập nhật:
- lần cuối vào ngày 02.06.2026
Mô tả
for approx. 100 E2 crates/hour
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
Nsdpfx Aoza Dvujg Djda
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
Nsdpfx Aoza Dvujg Djda
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Gửi yêu cầu
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Bienne
9.684 km
Máy tiện thanh tự động
TORNOSDeco 13a
TORNOSDeco 13a
Quảng cáo nhỏ
Denkingen
9.549 km
Máy thanh
Tornos BechlerDeco 2000/20
Tornos BechlerDeco 2000/20
Quảng cáo nhỏ
Kaunas
8.384 km
Đóng gói pallet cho mọi sản phẩm
SchubertTLM-F2 / F44
SchubertTLM-F2 / F44
Quảng cáo nhỏ
Krotoszyn
8.852 km
Máy nhồi chân không với bơm Busch
REXRVF 327
REXRVF 327
Quảng cáo nhỏ
Misterton
9.981 km
Người ký gửi sô cô la một lần
Loypackone shot moulding machine
Loypackone shot moulding machine
Quảng cáo nhỏ
Thrapston
10.009 km
Máy rửa khay công nghiệp lớn
IWM Industrial Washing MachinesCrusader 1000 with 5 stage blower
IWM Industrial Washing MachinesCrusader 1000 with 5 stage blower
Quảng cáo nhỏ
Contamine-sur-Arve
9.788 km
Máy tiện kiểu Thụy Sĩ CNC
TORNOSDECO 13bi
TORNOSDECO 13bi
Quảng cáo nhỏ
Ba Lan
8.733 km
Máy cắt bát
SEYDELMANNK 126 H AC8
SEYDELMANNK 126 H AC8
Quảng cáo nhỏ
Vincennes
9.963 km
4 đường hầm lên men đã qua sử dụng
BONGARD6317788
BONGARD6317788
Quảng cáo nhỏ
Valea Călugărească
8.303 km
Dây chuyền sản xuất bánh ngọt
GEA COMASLTH 400
GEA COMASLTH 400
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi




































































































