Xe nâng phía trước

Kalmar DCE 100-12

Technical details see photo 2

With heating
25,000 operating hours, 1st owner

2 pairs of forks
1x width 34 cm, length 240 cm +
1x width 20 cm, length 120 cm

Additional weight -> Driving load 12,000 kg
Own weight 20,000 kg
Built-in scale
Max. lifting height 4750 mm
Tires Michelin XZM

Garage-maintained machine, every service was performed by a specialist workshop (Kalmar partner).

The transmission (ZF) was replaced at 23,000 hours
The oil pump was replaced at 24,000 hours

The new spare parts we installed in the forklift alone cost more than €45,000!!!!
Price ex-sawmill
Mast height: 4070mm
Max. lift height: 4750mm
Tires: Michelin XZM 12.00R20 with approx. 500 operating hours
Laedpfonr Hbnex Ac Dok
Total operating hours approx. 25,000 hours (hour meter replaced at approx. 11,000 hours due to a defect)
New turbo at 10,028 operating hours
New ZF transmission and new oil pump at 21,000 hours
New lift chain at 23,000 hours and new seals for the lift cylinder
New oil cooler at 25,000 hours
2 sets of forks, 340mm wide and 2450mm long, and 200mm wide and 1250mm long
Volvo 6-cylinder engine
Engine and valves were re-adjusted at 25,000 hours, all officially by a Kalmar mechanic (receipts available)
All services performed by Kalmar mechanics, 500 hours of minor service and major service 1,000 hours

The forklift was replaced with a new one at 20,000 hours (2014). From then on, it was only used as a backup for the sawmill in case a machine failed.
The forklift was always kept in the garage and was regularly serviced and lubricated.

You are welcome to inspect it in advance.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.