Bàn thử nghiệm máy phát điện khởi động dây đai 48V

Kübrich Komponentenprüfstand

Kübrich
Kübrich test systems 48V belt starter generator - component test bench
Details of the test stand: (see Fig. 13)
Frame with
(1) Mounting device for a belt starter generator
(2) Load machine
(3) Belt
(4) MP1: Switch cabinet
(5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O
(6) MP2: Switch cabinet with Simotion
(7) MP4: Switch cabinet with DC-DC converter
(8) H3: Measurement technology box
(9) H4: Transfer box
Intended use:
The test stand is used to carry out tests on belt starter generators during development.
Technical data:
Electrical connection data
Power supply: 400 V / 32 A
Hodpoumv Emofx Ab Iei
Battery simulation: 0 - 60 V
Current: 0 - 250 A (continuous)
Current intensity: 330 A (short term, less than 1 s)
Control voltage 24 V
Mechanical performance data according to the data sheet of the load machine
A transmission ratio of 1:2 to the test specimen shaft must be observed.
Speeds:
Load machine:
Set-up mode: 0 - 50 1/min
Automatic mode: 0 - 10 000 1/min
Test specimen motor:
Set-up mode: 0 - 100 1/min
Automatic mode: 0 - 20 000 1/min
Dimensions and weight
Width: 850 mm Height: 1386 mm Length: 1687 mm
Weight: approx. 1.2 t
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.