Rơ-moóc ben ba chiềuHUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
Rơ-moóc ben ba chiều
HUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
VB chưa bao gồm thuế GTGT
6.150 €
Năm sản xuất
2026
Tình trạng
Mới
Vị trí
Nürnberg 

Dữ liệu cơ bản
Giá & Vị trí
VB chưa bao gồm thuế GTGT
6.150 €
- Vị trí:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
3.000 kg
Trọng lượng không tải:
940 kg
Trọng lượng tải tối đa:
2.060 kg
Tổng chiều dài:
4.555 mm
Tổng chiều rộng:
1.910 mm
Tổng chiều cao:
1.260 mm
Chiều dài không gian chứa hàng:
3.130 mm
Chiều rộng khoang hàng:
1.740 mm
Chiều cao khoang chứa hàng:
400 mm
Trục và bánh xe
Cấu hình trục:
2 trục
Kích thước lốp xe:
195/50 R13C
Phanh
Phanh rơ moóc:
rơ-moóc có phanh
Chi tiết về đề nghị
- ID tin đăng:
- A23368807
- Cập nhật:
- lần cuối vào ngày 22.11.2026
Mô tả
Humbaur three-way tipper with electric pump and Furmann steel sideboards, hot-dip galvanized, 40 cm high, for demanding applications.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Knsds Algdiepfx Adhed
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Knsds Algdiepfx Adhed
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2011
42 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 911 9... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


























