Máy đo độ tròn và độ trụHommel Jenoptik
Hommel Etamic 4004
Máy đo độ tròn và độ trụ
Hommel Jenoptik
Hommel Etamic 4004
Năm sản xuất
2009
Tình trạng
Đã qua sử dụng
Vị trí
Mielec 

Dữ liệu cơ bản
- Tên máy:
- Máy đo độ tròn và độ trụ
- Nhà sản xuất:
- Hommel Jenoptik
- Mô hình:
- Hommel Etamic 4004
- Năm sản xuất:
- 2009
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
- Vị trí:
- SSE EURO-PARK, Polskiego 3, 39-300 Wojska, Polen

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23356949
- Cập nhật:
- lần cuối vào ngày 19.11.2026
Mô tả
Application area and features:
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
Iisdpfx Ae Ak Huzjg Nei
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
Iisdpfx Ae Ak Huzjg Nei
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2020
19 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 9733 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi








