Buồng thử nghiệm khí hậu 350 lít Ex/lCTS
C-40/350 Ex/l -40°C /+180°C
Buồng thử nghiệm khí hậu 350 lít Ex/l
CTS
C-40/350 Ex/l -40°C /+180°C
Tình trạng
Đã qua sử dụng
Vị trí
Borken 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
- Vị trí:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A19446591
- Số tham chiếu:
- 24669
- Cập nhật:
- lần cuối vào ngày 27.06.2025
Mô tả
CTS
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
approx. 2000 W at -20°C
Climate Testing:
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Kedpfx Acswvr H Uj Denf
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Type: C-40/350 Ex/l
Climate Test Chamber, Water-Cooled
ATEX Zone 1
The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions.
Temperature Testing:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5:
Heating: 3.5 K/min
Cooling: 4 K/min
Heat compensation:
approx. 3500 W at +20°C
approx. 2000 W at -20°C
Climate Testing:
Temperature range: +10°C to +90°C
Humidity range: 10% to 95% relative humidity
Dew point range: +5°C to 78°C
Temperature deviation: ≤ 1.0 K over time
Humidity deviation: ≤ ±3.0% r.h. over time
The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data.
Technical Design:
Cooling unit:
water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A
Test chamber: Floor load capacity 150 kg/m²
Rack: Stainless steel,
support surface 620 x 600 mm
Load per rack max. 35 kg
Total load with maximum rack configuration 100 kg
Control system:
32-bit controller
LCD operating panel
Digital display of setpoint and actual values
Numeric input of setpoints
Plain text fault messages
RS 232 interface
Kedpfx Acswvr H Uj Denf
Ethernet interface
Free switching channels for user-side test item control
Dimensions:
Test volume: 350 liters
Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 7.15 kW
Nominal current: 14.3 A
Protection class: IP 54
Sound pressure level
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2012
Gửi yêu cầu
Điện thoại & Fax
+49 2861 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Haiger
9.502 km
Trung tâm gia công
DMG MORICMX 600 V
DMG MORICMX 600 V
Quảng cáo nhỏ
Schloß Holte-Stukenbrock
9.435 km
Trung tâm gia công
Droop & ReinModimill
Droop & ReinModimill
Quảng cáo nhỏ
Kaufungen
9.391 km
Trung tâm gia công toàn cầu
Deckel MahoDMU 80 monoblock
Deckel MahoDMU 80 monoblock
Quảng cáo nhỏ
Butzbach
9.480 km
Trung tâm gia công
Starrag-HeckertHEC500D
Starrag-HeckertHEC500D
Quảng cáo nhỏ
Tatabánya
8.858 km
Máy mài bề mặt mài bề mặt
JungHF 50 (2338)
JungHF 50 (2338)
Quảng cáo nhỏ
Ruhla
9.351 km
Máy phay 5 trục
Deckel MahoDMU 70 eVlin
Deckel MahoDMU 70 eVlin
Quảng cáo nhỏ
Nauen
9.132 km
Bộ hòa tan Vollrath EWFX 60
Dissolver VollrathEWFX 60
Dissolver VollrathEWFX 60
Quảng cáo nhỏ
Wilbertoord
9.634 km
Trung tâm gia công - dọc
DMGDMU 40 Mono Block
DMGDMU 40 Mono Block
Quảng cáo nhỏ
Arnsberg
9.498 km
Máy trộn Mixaco CM 1000
MixacoCM 1000
MixacoCM 1000
Quảng cáo nhỏ
Sinsheim
9.503 km
Chất hòa tan
Schneider Maschinenbau GmbhSHDC15 KWFU Ex
Schneider Maschinenbau GmbhSHDC15 KWFU Ex
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi































































































