Hút khóiBRAS ASPIRATION
PR 3000-160EXC
Hút khói
BRAS ASPIRATION
PR 3000-160EXC
giá cố định chưa bao gồm thuế GTGT
800 €
Năm sản xuất
2025
Tình trạng
Mới
Vị trí
Chalon-sur-Saône 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
800 €
- Vị trí:
- 23 rue Colbert, 71100 Chalon-sur-Saône, France

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21152202
- Cập nhật:
- lần cuối vào ngày 03.02.2026
Mô tả
The PR EXC extraction arm is manufactured in accordance with the requirements of ATEX Directive 94/9/EC concerning equipment intended for use in potentially explosive atmospheres.
The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts.
The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation.
Application
Bodpfxjygurmj Agrjcu
The design and features are unique, as highlighted:
Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity.
The ATEX environment PR arm is designed according to Fumex’s core principles:
Support arms positioned externally
Technical Data
Length – 3000 mm
Dimensions – Ø 160 mm
Marked EX II 2 GD
Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts.
The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation.
Application
Bodpfxjygurmj Agrjcu
The design and features are unique, as highlighted:
Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity.
The ATEX environment PR arm is designed according to Fumex’s core principles:
Support arms positioned externally
Technical Data
Length – 3000 mm
Dimensions – Ø 160 mm
Marked EX II 2 GD
Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2025
Gửi yêu cầu
Điện thoại & Fax
+33 6 44 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi






