Máy laser Trumpf với robot MotomanITEC Automation & Laser Ag
3-Achs Laser Trumpf- Motomann -Coil
Máy laser Trumpf với robot Motoman
ITEC Automation & Laser Ag
3-Achs Laser Trumpf- Motomann -Coil
Năm sản xuất
2005
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Gießen 

Thông tin về máy móc
- Nhà sản xuất:
- ITEC Automation & Laser Ag
- Năm sản xuất:
- 2005
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Margaretenhütte 57, 35398 Gießen, Deutschland

Gọi điện
Chi tiết kỹ thuật
- Loại làm mát:
- nước
- Trọng lượng tổng cộng:
- 15.000 kg
- Tổng chiều dài:
- 10.000 mm
- Tổng chiều rộng:
- 4.000 mm
- Tổng chiều cao:
- 25.000 mm
- Năm đại tu cuối cùng:
- 2024
- Thiết bị:
- Dấu CE, hệ thống bôi trơn tập trung, bộ làm mát, tài liệu / sổ tay hướng dẫn, dừng khẩn cấp, rào chắn ánh sáng an toàn
Chi tiết về đề nghị
- ID tin đăng:
- A22697652
- Cập nhật:
- lần cuối vào ngày 06.09.2026
Mô tả
ITEC AG laser cutting system for circuit boards.
The system consists of the following components:
ITEC AG cell with granite bed, 3-axis
Hnodpfx Ahjzyzzyo Tst
Motoman NX 100 robot, vacuum manipulator
RIEDEL L 21/8 TR 3.00 cooling system
GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers
GSW Schwabe AG coil handling system VRMA 80/76
The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached.
The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability.
The Motoman robot picks and places components using a vacuum manipulator and camera.
The system has been continuously maintained and is in production-ready condition.
Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
The system consists of the following components:
ITEC AG cell with granite bed, 3-axis
Hnodpfx Ahjzyzzyo Tst
Motoman NX 100 robot, vacuum manipulator
RIEDEL L 21/8 TR 3.00 cooling system
GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers
GSW Schwabe AG coil handling system VRMA 80/76
The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached.
The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability.
The Motoman robot picks and places components using a vacuum manipulator and camera.
The system has been continuously maintained and is in production-ready condition.
Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Gửi yêu cầu
Điện thoại & Fax
+49 641 9... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
























